load the first 4 colors to your ams and add a „pause“ at the end of the 4th color. load colors 5-7 to your ams, and as soon as the printer switches to the 5th color you can also load the 8th color.  I will start to print today. if you‘re interested I could share my print profile and add some pictures on how to handle this with only one ams?

M.verbeke

Hello, I would be interessted in your results. It would be great if you would share it with us. BR

ChristianO

barcode3d

I would be interested in knowing how you printed this..
2 AMS units?

RoninSr

phakit

0.2mm layer, 2 walls, 14% infill

It's a beautiful design and a great way to enjoy your AMS(s) to the utmost! Thank you to the designer. I gave you a "Boost" in appreciation. I'll be printing the Monarch next! These make great gifts. 

I uploaded a profile for the 0.2mm nozzle I used for this print. 

egrep_

Thx for the kind words and your print profile

Lord_Cobbelpot

Czacza

when you assign colors in your AMS just pick the second color over and over 

user_1975384228

Can someone tell me how I could set this up to print in only two colors? I'd like to just use a tricolor silk for the 2nd color only. 

candi.daitch

I have an AMS on order. this beautiful butterfly will probably be my first print!

Bradz

fancy pants Mcgee with his 2 ams. Anyway to use this with 1 ams?

zackza

enricoRE

cover

Butterfly Rainbow02_2d8cbb2a-12d1-41d4-97e7-d99871b375e9.jpg

Butterfly Rainbow_20be3e11-1e2f-40e7-a964-07678f0a4ee8.jpg

Butterfly Rainbow_536afd58-3855-4fa6-ba56-5116ac860dee.webp

plate_1.png

For the first layer, a layer height of 0.2 mm can be used to ensure good adhesion. For the subsequent layers, a layer height of 0.1 mm can be used to achieve a detailed print. It is recommended to make the print with a small nozzle diameter of 0.4 mm or smaller to preserve the details of the design.

IMG_6929_59911734-d0df-4ae7-ad4c-7d493c00974c.webp

plate_1.webp

The designer notes in the description that this delightful design should be printed with the .2mm nozzle for the best effect, but there is no profile for that. So, I uploaded mine with any points to the designer. Thank you for this swell design, @barcode3d. The Monarch is next!&nbsp; The profile provided by the designer has many changed settings that are unnecessary and irrelevant to this print. This profile has the stock X1C profile with the two following changes: Prime Tower Width == 75mmInitial layer == 0.20mm - As suggested by the designer&nbsp;Printed using Bambu Lab PLA Basic.&nbsp;

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

The wings of the butterfly are only 0.5 mm thick and have an edge of 0.2 mm, allowing them to flutter flexibly. This design is perfect for 3D printing and will be a beautiful decoration for any room. Link to another butterfly: https://makerworld.com/en/models/480513#profileId-392107

Print Profile(2)

Description

Comment & Rating (29)

License

Related Models

Flower Butterfly

Tiny unicorn

Butterfly Knife / Balisong / Trainer / Messer

Birthday Crown