I recently uploaded my own design of what I think is the ultimate modular spool to have in your arsenal. This is especially true for the AMS. You can use pretty much any spool using friction to keep it together and not have retraction issues. Just need to print up two sides, an insert for whichever manufacturer spool you need, and either use the recommended desiccant holder or bolts and inserts to get that friction fit. It's also meant to be able to change those not often used colors by swapping them out using zip ties. Has a spot for RFID tags (incase you want to reuse them) and locations for adding filament holders (recommend only on right hand side of AMS). Let me know what you think . https://makerworld.com/en/models/1056044 #Spool #Bambu Spool #AMS #RFID

Just released my AMS refill spool design, I've been using this for a little while now - would love to get some feedback from other users. The original printable Bambu spools tend to wear over time and can also be difficult to snap together / apart depending on the printer tolerances. I was trying to solve that issue here with a nice big thread for speed and convenience and you can still lock the two parts together with a single common M3 screw if you have any doubts about the thread holding. Thanks! #AMS #Spool You can find the design here: https://makerworld.com/en/models/928537#profileId-892121