Came out really good. Printed the large model, shame no drip tray yet

Great quick print and worked as designed!

Worked perfectly 👌

Brilliantly designed. I created my own profile to resize it to the max size of the A1 plate and used infill patterns for different bottoms and sides. I had to glue the pieces just to increase sturdiness as it's being used by my kids to store their toys and trinkets :) but I think if just using it to organise a space, you shouldnt need to, they are sturdy enough once completed.

Simple yet very efficiently designed. Working really well.

Works well and easy to assemble

Worked out well, using it to hinge some light weight mdf doors

Worked great and printed easily

I didnt use it specifically for what it was designed for :D. My daughter's favourite headband broke 💔 so I just printed the headband and replaced it. worked perfectly. I just had to resize it so it was the same length.

Turned out well. I used it for my 2.5mm plexiglass so I had to make the internal space smaller to fit using a primitive to increase thickness in yhe catch

Turned out really well in pumpkin orange and green :D

Works as intended :) Makes it all look clean. Created a profile to avoid the capacitor on the left of the hot-end. Still very sturdy

Printed perfectly. The instructions are good and clear. I used 2x(1mmx8mm) magnets on each hole. It did require some filing on the center nub that is to align with the hole on the extruder head. I measured with my calipers, both are 5.7mm in diameter thus it doesnt go all the way in and you see a gap. I filed it down to 5.5mm on the print and it worked great :) nice and flush!!

Made some slight adjustments to the original profile, uploaded for others to try. Brilliant model again, thanks!! Printed easily

Turned out very well. Supports were easy to remove and minimal cleanup required

Printed fine but I discarded as the windows were a pain to cover as they are curved. Ended up with a design with smaller windows which work just fine

Easy print and does the job! top marks 👌

Very nice and was an easy build. Added name on the inside.

Works really well, top marks 👌

Works as described, was a really easy printed in PLA