P1s with generic pla no brim. Printed great straight from the print profile of one color. Moves freely. Curious what the up arrow and the z on the 3rd segment are for.

Printed this profile (sped up) 0.16mm layer, 3 walls, 10% infill on P1S , generic PLA. Printed fine and is very loud and shrill. I printed it to call the horses but they act like they hear nothing! And it is really loud! Actually, it is so shrill I am going to go look for something a little lower pitched. Great job designer.

Printed fine. Sorry no time for pictures. I cut the box off the end and now I am going to try to figure out how to remix with an add on longer handle for cleaning my shower. Needs about a 12 or 18 inch extension. I have a cobra max to print it on. PLA on P1s for this print.

I rated this already but makerworld is asking again? This is the bomb. Fits behind the P1s AND you can use your rear spool holder.

I only printed one but it worked great and looked so cute next to the "image to statue" of my neice. Sorry, phone crash and no pics of the present but you can laugh at the niece caricature.

This basket printed great on my P1s with yellow petg. I use a cool super stick plate. I printed the basket first. No issues. The handle, as you can see, had a little problem with adhesion! I went back and added a 5mm brim and it printed fine. I have not used petg much and I was surprised at how hard it was to get the brim off. I replaced my ratty clothes pin bag with my "happy" bright yellow basket. My only concern is the hook is rather shallow and the wind may blow it off. We will see and report back if there are issues.

I test printed the base. Fits a 4x4 from big box store here in US, beautifully. Next spring, time for a new birdhouse! Or, If I learn to design, remix into a new birdhouse.

I printed one of these just to see if it fit my grocery store food skewers. It does! Printed perfect and if I ever need to build a mini green house, I know I can! Thanks.

Prints fine but pla will not hold water with 2 layers of filament. I printed in what I had on the printer which was basic PLA in pink on my P1S. Printed quickly with just a tad of stringing on the cone area. The lid fits snugly onto the base and it quite cute in pink. Sadly, pla does not hold water well, it appears. I put about half an ounce of water in with a little sugar and came back a couple hours later with the fly trap sitting in a puddle. The next one will be PETG.

printed with P1s on a super tack cold plate with pink pla. Printed beautifully. Folded and went together easily. To address the insertion problem, I just curled the two tabs out ward and it worked just fine.

Printed fine. I used the design not by the designer and it printed fine but I had to file the uprights for them to fit into the square base. I did not print the circle.

prints and slides great. Sorry no pics! I printed for my autistic nephew and he is totally mesmerized by the toy. Thank you!

printed great on p1s at fastest draft setting. I printed 2 just to have on hand. . Yes, I know the pink is horrible but when I bought my Cobra Max they offered a "variety pack" of 10 rolls for $100. Their idea of "variety" included 3 rolls of this strawberry pink!

printed great on p1s at fastest draft setting. I have never used an eccentric clamp but what a great idea. I printed 2 copies of all 3 sizes. Yes, I know the pink is horrible but when I bought my Cobra Max they offered a "variety pack" of 10 rolls for $100. Their idea of "variety" included 3 rolls of this strawberry pink!

printed great on p1s at fastest draft setting. I thought holes were misaligned but it was because I had tightened one corner down then tried to screw down other corner. I loosened the first corner and it lined up beautifully. As you can see, I printed a couple other parts as well. Yes, I know the pink is horrible but when I bought my Cobra Max they offered a "variety pack" of 10 rolls for $100. Their idea of "variety" included 3 rolls of this strawberry pink!

Printed on P1S with no problem. I am trying now in anycubic next slicer. Fits 1/2 pvc perfect.

Excellent. Now if I only knew how to modify to fit other spools!