#Troubleshooting hello! when i try to download print profiles, it doesnt download the selected one and goes back to the first one. any help would be appreciated because my name is felix but i cant download the right letters ahaha thankies!!!(Edited)

Whenever I start a print with my P1S, the print begins fine (early layers are stacked with minimal issues), but as the print proceeds, the layers aren't attached to each other and they have an almost web-like quality to them. I've had a ton of prints that were successful but in the past months (summer-time where I live), this has happened with all of my prints. Anyone else run into the same issue or know how to fix? I already tried cold pulling a couple times. #Troubleshooting #Questions #Beginner #Help Center #Pleasehelp

Can somebody help with what I might be doing wrong or how to mitigate my issue? I can't get this fidget to print and I would really like it for my autistic grandchild. I have a Bambu P2S. I downloaded the 3mf and fed it into Bambu Studio. I already had Bambu PLA Green loaded in the AMS and went with that (no changes). I washed the Textured plate with dawn and warm water. However, the print is having an adhesion problem on the first layer. I have previously used this filament for several other prints with no adhesion problems. I di notice the process is using 0.16mm High Quality @BBL P2S vs. the 0.20mm Standard @BBL P2S I normally see. #Troubleshooting(Edited)

Yall new trouble starting this morning: my nozzle won’t go all way back to the purge wiper and now it poos at the wrong side and doesn’t get wiped. suspecting its an x-axis issue but not sure what’s happening. let me know what yall think #Purgewiper #Troubleshooting

#Troubleshooting #Help Center I have this leg part I am printing on my A1 and for some reason when it gets towards the top it starts to shift pretty badly and I can’t figure out why i have greased and lubed it yesterday. It’s very firmly stuck to the plate so there is no wobble i am using Gyroid Infill at 40% and printing on normal speed. I have printed this twice and it has happened both times.

Hello everyone, I’m currently struggling with a FEM simulation problem related to 3D printed parts, and I hope someone here has experience with a similar workflow. My situation: I designed a part in Autodesk Inventor 2024. The real part is FDM 3D printed with 10% infill and defined wall thicknesses. I want to simulate mechanical loads using FEM. The problem: Inventor’s FEM simulation treats the model as a fully solid body, which massively overestimates stiffness and strength compared to the real printed part. This makes the simulation results unrealistic and not comparable to the physical component. What I am trying to achieve: I want a CAD model that matches the real printed structure, meaning: actual wall thicknesses (perimeters), internal infill geometry (e.g. gyroid / grid), ideally also reflecting the layered nature of FDM printing. My idea was: Start from a STEP (STP) file. Slice it using Bambu Studio (latest version) with the same print settings as the real part. Convert the sliced result back into a CAD model (STEP or at least a clean STL) that includes walls and infill. Use this geometry for FEM simulation. Software used: CAD: Autodesk Inventor 2024 Slicer: Bambu Studio (latest version) My questions: Is there any known workflow to convert sliced geometry (or G-code) back into a usable CAD or FEM-ready solid? Are there tools or plugins that can reconstruct infill and perimeters as real geometry? Or is the recommended approach to use homogenized material models / anisotropic materials instead of real geometry? How do you realistically simulate FDM parts with low infill in FEM? Any advice, tools, papers, or real-world experience would be greatly appreciated. Thanks in advance!#FEM #Engineering #Troubleshooting #converter #Questions

guys my screen keeps freezing, it gets left on the control screen and then will not work, only after shutting it off and back in will it work. #Help Center #Troubleshooting #A1 Problems #screen #frozen screen #Enclosure #textured plate #broken #hashtag

Hi! I am very new to the 3D printing world. I just got an H2C and I printed this file for a waste catch bin out of Bambu basic PLA green and black, with black being fed from the AMS right nozzle 0.4mm and green from the spool holder on the left nozzle 0.4mm but it came out like the image you see when swapping between colors. I kept all the settings in bambu studio from the print file here for the 7.5x30 AMS print. Any suggestions on why this may have happened and changes I should make? : https://makerworld.com/en/models/1265042-h2d-h2s-h2c-poop-chute?from=search#profileId-152547#Troubleshooting

#Questions #Needhelp #Help Center #Troubleshooting Hi How can I prevent so much filament from entering the interior of the object? This happens with the multicolour, and I would like it to stay as close to the outline as possible, like the blue one does. I don't know why it goes so far inside, I can't find anywhere to control that value. Can anyone help me?

#Troubleshooting i can't use makerlab anymore i keep getting these massages ....Service error . nothing works

#Troubleshooting Hello everyone, I've recently obtained a Bambu Lab P1S and have been enjoying printing ever since getting it. I'm aware I still have to learn a lot but I don't mind. I've been looking at the Bambu Studio trying to get the hang of it and decided to try to get an external STL to see if I can print it. After tinkering with the size as it was incorrect when it loaded, I managed to print it just fine. While there are some issues with the blade edge, I am happy that I got it too work I've used this model https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/ultimate-buck-120-3d-model I had the blade loaded with the blade edge down and added supports. I didn't adjust any other settings rather than add tree supports and re scale the size of both the handle and the blade. The blade is printed with White PLA from Bambu Lab I am surprised how smooth the side of the handle are, even if it has rough edges around the grip, I'm still happy with the result. Questions: 1. Would flipping the blade orientation have prevented the edge issues? 2. Is there a way to fix the blade? 3. Can I use sandpaper to fix the blade? What grit should I use? 4. Any tips for smoothing the grip's top and bottom?

Can someone tell me how to fix this issue because I just woke up and now I can’t use my printer because it can’t connect to my laptop #Help Center #Troubleshooting

#Help Center #Questions #Troubleshooting need you guys help my creality filament turns to powder it’s only happening with the ones that I just bought. I’ve been drying them, but for some reason, it’s just turning to dust in my printer. any advice I’m probably going to be switching over to bamboo labs ABS later

I need help with my PTFT tube and AMS #Help Center #Troubleshooting #Questions

#Help Center #Troubleshooting I can get the PTFT tube out. The problem is is the filament is stuck in there so it’s like I’m just pulling on the PTF tube. That’s pulling on the filament trying to get it out of there and then I end up just putting the PTFT tube back in. Just wanna know if anybody knows how to fix this real quick if not, I’m gonna keep looking things up

It wouldn’t let me cancel the print because it started printing in the air with nothing printing and then I tried to cancel it and what happened was it wouldn’t let me cancel it so I turned it off and now it just won’t let me do anything #Questions #Troubleshooting #Help Center

Just need some help for some reason I can’t cancel the print. It won’t let me. The print off there already and there is an ABS filament stuck in one of the tubes, so I’m trying to get that out, but it also won’t let me cancel it to be able to heat it up to be able to pull it out of the Nozzle cause it’s kind of stuck in there right now and I don’t wanna pull it out and break something #Questions #Troubleshooting #Help Center

Thank you guys for all the help still need more help but that’s the fun about figuring out this printer because it’s not too bad #Questions #Troubleshooting It’s stuck I don’t know what that gray part is called but it’s stuck in there and I don’t know how to pull it out or push it back in to be able to unhook one of the tubes To take it out because this creality filament is becoming a pain in my butt