0.4 mm Nozzle [Test]
0.6mm Nozzle (Recommended)
HueForge Default Settings
4x Clips. 0.16mm layer height. Max walls. Supports used.
2x Clips. 0.16mm layer height. Max walls. Supports used.
1x Clip. 0.16mm layer height. Max walls. Supports used.
Adaptive Layer Height, 3 Walls, Gyroid Infill
Cap - 4 Plates
0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill (One Plate)
0.2mm layer, 6 walls, 25% infill (Strength)
0.12mm layer, 2 walls, 15% infill
0.2mm layer, 15% infill ~12 min print time
0.2mm layer height ~20 min print time