Chinchilla owners will understand…

My spouse and I refer to our chinchilla as a ‘potato’ quite often, so I figured I'd make a funny sign to display near her cage. The photo was made in Photoshop, then imported into HueForge.

Black, gray and white filaments were used for this print. A Bambu X1C profile is provided, as well as the original STL file. Please see below for the HueForge description, as well as settings (for those who may not have HueForge):

Settings:

• Layer Height = 0.08mm
• Initial Layer = 0.16mm
• Infill = 100%
• Outer Wall Speed = 60mm
• Inner Wall Speed = 120mm
• Infill Speed = 150mm

HueForge Description:

Filaments Used:

• PLA+ Inland Black (Spooless) Transmission Distance: 1.6
• PLA Inland Gray Transmission Distance: 2.4
• PLA+ Inland White (Spooless) Transmission Distance: 4

Swap Instructions:

• Start with Black (Spooless)
• At layer #7 (0.64mm) swap to Gray
• At layer #11 (0.96mm) swap to White (Spooless) for the rest.