Printed in PETG and the print came out very clean. Thank you

printed well in PETG and seems to work as described.

Printed well in PETG. Spare blade draggy going into storage slot. Used a tiny bit of paste wax on the bottom edge of spare blade, now spare blade and slot both work well. Whenever I have plastic surfaces that rub, I use a tiny bit of Renaissance Wax, a micro-crystalline wax, to solve the problem. Hasn’t failed me yet.

Printed very nicely in PETG. I checked its markings with a steel rule and they were right on. Thank you!

I printed a couple to play with. The large size was most useful to me. After watching the first one print, I printed the second one with 30% cubic infill to improve structural strength.

Just wanted a quick cover while I decided what course to take later. This filled the bill. Ghank you.

Very clean print in PETG using generic settings. May seem a tad loose on some Overture spools but stay in place in AMS and function fine.

Printed very nicely using PETG with generic settings. Fit well. Thank you

Prints very nicely in PETG using generic settings. Fits very snugly.

printed in Hatchbox PETG using generic PETG settings. came out very nice and fit was excellent. Thank you

Printed with Hatchbox PETG using generic settings and fit screen perfectly. I used a bit of TPU filament for hinge pins.

Very nice print. Used Hatchbox PETG with generic PETG settings in P2S and came out perfect. Thank you!

Clever design, works well. Printed nicely in PETG. Thank you!

Printed nicely in PETG. Thank you!

Printed nicely in PETG. Thank you!

Printed in PETG, fit perfectly. Thank you!

Did eight at once, prints fast and cleanly in PETG.