Printed from Phone App, using X1C with Bambu Galaxy.

X1C using PETG-HF. Printed 1 for me & 1 for a co-worker. I think another will ask for it too. only issue with both was where the ring goes in. However as far as I can tell it doesn’t effect the usefulness of the print. My shoulder pain is no longer an issue at work. Thank You for making this model public. 🤩😊😎

cool little print. From phone, using X1C Bambu Galaxy. Having issues with the eyes. Are they supposed to click in or am I supposed to glue them in? I thought pop in thats why I printed this model. Help!

Printed on X1C from Computer (arm rest) & Phone (large clamp) using Bambu PETG-HF. Can not say how well it works yet obviously it needs to be shaved down for the arm rest to fit.

Computer,X1C, Bambu Basic Red & Black. Only change was support. Painted eyes. These came out not looking like the pictures of the profile or other users. (Snout details)

Printed from phone app, on X1C, using Bambu Basic PLA ( red/ jade white). Did 3 at one time took 5+ hours, so I woke up this morning with something fun to share.

Printed on X1C using Bambu Basic PLA. No issues. Used a sharpie to color numbers. The middle disk is tight is some places and loose in others. Plan to reprint with numbers painted on slicer.

Printed on the X1C, using Jade White PLA from Bambu, turned out ok. Lines and streaks could be from my Filament.

Printed from Phone on X1C, using Basic PLA. 1st print no issues.

Printed from phone on X1C, with Bambu Basic PLA. Things that need to be removed came off easy (even after I left it there for around 12 hours). Top & Bottom fit tight but with no issues getting the Top to slide into Bottom. Only issue I had was getting the scrubbies into the slot. FYI don’t feed them one at a time LOL Will boost!!

Printed from phone, X1C using Nambn PLA Silk “Dawn Radiance” took 9+ hours looks great!!

Works as promised. There is even room for a small sponge or paper towels to soak up the drips. (if cut the correct way, don’t mind my shoddy example).

X1C using the Filaments listed on the case. I added text. Am now in the pain staking process of listing all the filaments with inserts for colors.

TPU 85A printed on X1C

X1C printed from Phone App using PETG

X1C printed using TPU for AMS. Using in Sunlu 4. Top is a little loose when full. Love the chambers. Started to print another model thought the holes would let the silicate fall out.

Love this!! After calibration of tge Flow rate I will be running this test for each filament change.

X1 Carbon using Bambu PLA Red. 1st print randomly stopped. 2nd finished perfectly! 1hokds 7 the other 6 Love it will be printing more. And will use the support settings for all my prints, they came off like a dream.

PLA Silk “Dawn Radiance”with PLA Matte “Bone White”