Dragon Egg with Baby Dragon Remixed by Enivel3D

Remixed by

Enivel3D

Miniatures>Creatures

Print Profile(5)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.2mm layer, with eyes

Designer

2.3 h

2 plates

4.9(54)

0.2mm layer, 3 walls, 10% infill

Designer

2.5 h

3 plates

4.9(144)

0.2mm layer, multicolor

Designer

3.2 h

2 plates

5.0(33)

With line up for dual color filaments

2.5 h

3 plates

4.8(5)

Click to see more

Open in Bambu Studio

Boost

735

1492

524

276

2 k

1.3 k

Released

Description

Boost Me (for free)

If you like this, you can boost me for free! It would be much appreciated!

Dragon egg with a removable baby dragon inside.

I used super glue to hold the eyes in.

The bottom half of the egg has been rotated 90 degrees to help with multicolor filaments.

If you are using a gradient filament, use print by object or use different plates for the egg pieces. That really helps with the transitions. Check https://wiki.bambulab.com/en/software/bambu-studio/sequent-print for more information.

Yes, you can sell prints of this model.
You do not have to buy a license or join my club.
You only need to give proper attribution by mentioning that I designed it.
Dragon Egg with Baby Dragon © 2025 by Enivel3D is licensed under CC BY SA 4.0

Leaving me a like and a boost will help a lot and be much appreciated!

Check out the Dinosaur Egg with Baby Dinosaur!

Bill of Materials

Bambu Filaments

Black

A00-K0-1.75-1000-SPLFREE

19.99 USD

× 1

Gold

A05-Y4-1.75-1000-SPL

24.99 USD

× 1

Buy Now

Download BOM

Comment & Rating (524)

@user_77755943

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

Great print! My kids love them! I don't know if it'll work for everyone, but I rotated the bottom part of the egg clockwise 90 degrees when using multicolor filament and it made the colors match up from top to bottom.

@Enivel3D

Thank you for the rating and the picture! I will change the print profile and rotate the bottom 90 degrees to see if that helps more people. Thanks for the tip!

@user_77755943

Boosted

Replying to @Enivel3D :

No problem! I'm not sure if it works for all filaments, but I used tri color OVV3D silk and it worked both times! Thanks for making the file, the kids love them.

@user_2950371965

Replying to @Enivel3D :

not sure has the profile been changed. the original still prints totally off from matching.

@PTCreations

Print Profile

0.2mm layer, 3 walls, 10% infill

This little thing is great! I printed this in a rainbow silk filament and my daughter LOVED it! The only thing I would suggest for others is if you plan to use any gradient/silk filament, check the orientation of the top and bottom part of the egg and align with the threads. Otherwise, your top and bottom egg parts won't line up with the gradient in your filament. This may be very hard to get right, especially the first time. If this isn't an issue for you, this print is excellent!

@Enivel3D

Thank you for the review! I agree with you about the top and bottom of the egg for gradient filament. You could print by object for those or on separate plates to help with that.

@skvibi

Replying to @Enivel3D :

Tell me exactly how to print with a gradient so that the thread meets? I just have a problem that nothing came together

@Enivel3D

Replying to @skvibi :

Employ per-object printing or utilize separate build plates for the egg components Consult https://wiki.bambulab.com/en/software/bambu-studio/sequent-print for further details

Show original

@wdw85

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

Very beautiful ❤️❤️❤️

Show original

@Enivel3D

Thank you for the rating and sharing a picture!

@glochids

Boosted

Print Profile

With line up for dual color filaments

colours line up perfectly! first time closing was slightly stiff (got stuck with half a scale to go), but after closing and opening a couple times it's brilliant!

@Enivel3D

Thank you for the review and the boost!

@user_2950371965

first time rotate needs some filing off, it would require enivel3d to update model. its just the corner of print start.

@Kartendealer

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

Excellent model and clean print Unfortunately I had problems with the tricolor filament no matter what I tried it didn't really flush with the color transition I printed a total of 7 eggs or rather top and bottom parts rotated etc only 1 egg turned out perfect But I can't fault the design in my opinion it's not cleanly printable with tricolor and color gradient I'll try again in a few days with monochrome silk let's see Still top and a boost :-)

Show original

@Enivel3D

I agree that the multicolor filament is hard to make line up on this print. Thank you for the rating and the boost!

@81818_jkk

Print Profile

0.2mm layer, 3 walls, 10% infill

Great Print

@Enivel3D

Thank you for the rating and posting a picture!

@tupapirico

Excellent model, it's beautiful! I'm curious, could you tell me why it came out this way? It has some small imperfections; I'm not sure why. I'm new to this, I don't know if it's because the reduced speed for overhangs isn't activated