I cut it in half, added a typical picture frame screw mount hole on the back, a hole all the way through for string and used it to mount my sons Egypt models he got from a book. Printed with a glow-sparkle fillament I randomly bought. One very happy son. One amazing model.

I don’t have PVA support, but can confirm it prints perfectly with the PLA/PETG support material. Now to colour the panels with a few shades of caramels and browns.

Excellent improvement. But I had to swap the screw securing the ‘adapters’ from an M3x25mm in the original model to an m3x16mm. Maybe thicken up the new adapter to match the overall depth of the old BL 4-in-1, produce a small spacer (like used to sit between the 4-in-1s), or simply update the description. Also, I think the thumb screws on the outputs of the coupling assemblies are overkill. The PTFE tube won’t be moving if cut to the right length.

Printed in Bambu Lab PLA Galaxy Nebula for a fantasy look.

Great print. I Wanted to Desiccant in the car, but it absorbs too much moisture too quickly to be effective. Nothing at all to do with an excellent model. Printed in ABS GF so we can go straight into a dryer

Printed great. But not sure which funnel is for this version. Helpful text in a profile title or main description would be appreciated. maybe even including the correct final in each profile on a separate plate.

I usually merge these into the model before printing but I forgot on one of the Mechs. so printed and glued a pair.

Last of the Mechs. Brillient work. After printing all 4 I can confidently say that’s some exclude support painting saves removal and filament without affecting any quality. I also rearrange all the parts for more efficient printing.

Another great model. I found splitting the ‘scope’ arm into 2 rather than a print-in-place was better. The PiP version didn’t break easily apart and broke.

Another great TMNT model!

Great, fun sword. A longer version for the H2 series would be appreciated.

beautiful model, but the blade is a little fragile on the layer lines when printed with Silk+. Better with other filaments that exhibit better layer adhesion.

Printed great. No senors yet as they’re for my brother.

Printed great out of ABS-GF. First use ongoing to stand up desiccant holders for drying.

Really nice designs

Printed and works great. loosened it up with grease and a drill.