great model!, i printed it in a single plate with smart placement and print by object - uploaded the profile for others to enjoy :)

had issues with the eyes, too small :/ but very cool nevertheless

great!

great, supports were extremelty hard to remove though, had to use a knife

great sculpture! i managed to get it to be 50cm wide on a single A1 plate by slicing and smart placement on the plate *i added the print profile for others to enjoy great job!

a really cool mode, i used it as a base for the moon lamp! if i am allowed ,i will upload the modified atlas sculpture with the cutout sphere and wire channel so others can turn it into a lamp as well

a really cool print, i used another model and adjusted the sizes so i can place the moon on top of "atlas" shoulders.

An absolutely amazing model (and coloring!), probably the most impressive model i printed up to date! i immediately knew everyone will want one so i went on to experiment with printing 3 of them at once (to make the waste of color switching tolerable) to do so, i scaled the model down to about 75%, to make sure the tentacles are still flexible and fun, i printed just a slice of 2 tentacles at the scaled down size (with a single color - so its a fast 2h test print). it worked amazingly well - so i added this profile for other non tool-changer users to be able to print the model at its full dotted glory with better waste management (same number of color switches, but this time, for 3 models instead of 1) *i also added the test tentacles plate, so you can first print it to make sure your printers accuracy is good enough to keep it flexible at this scale before fully committing to the 3-at-once. again, kudus to the designer for an absolutely amazing model

great model, people in the office loved it !

amazing model! i decided to print it at 170cm (life sized). sliced it to 24 plates and printed on my A1. if there is a demand i can upload the 3mf for the real life sized model. its a really cool model for this, i managed to print it using only 5kg of filament, and due to the model nature, its quite toleant for small faults in printing due to the perforated nature of the design.

printed at 60cm tall, sliced to 4 pieces and glued, very cool model :)! looks stunning! i uploaded the enlarged profile.

amazing everybody wants one !

very cool! printed nicely, played a bit with the coloring

printed perfectly

amazing model! the picture is using the max size of ender3 ke. printed a smaller one but it was too small and the shell had some holes.

great stand, stable and nice looking

printed perfectly