Satisfying Fabric by Caleb Wride

Caleb Wride

Toys & Games>Other Toys & Games

IP Report

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

0.1mm layer, 2 walls, 15% infill

Designer

4.8 h

1 plate

4.7(263)

Smaller Test Version

Designer

1.1 h

1 plate

4.8(45)

0.4 nozzle, 0.2mm layer, 2 walls, 15% infill, textured PEI

4.5 h

1 plate

3.8(5)

Open in Bambu Studio

Boost

1892

3789

477

385

5.6 k

3 k

Released

Description

Enjoy this high quality, lightweight, and satisfying piece of fully 3d printable fabric! Some fabrics, such as Nasa Fabric, are fairly thick and have a limited range of movement, but not this design! It is extremely thin, and flexes in both ways! Printing in TPU or another type of flexible material gives the fabric an extra boost of flexibility! Printing on a Smooth PEI Sheet gives the fabric an even smoother texture! This makes a great gift for fidgeters, people with anxiety, and others. I have posted a smaller test version of this model. I would highly recommend printing that first, to make sure you have proper bed adhesion, and that your printer will be able to print it. But of course, a tiny version isn't good enough. After confirming that your printer can handle it, go print the big version. Be prepared to have you mind blown!

Boost Me (for free)

Boosting is free for you but really helps me out a lot! I really appreciate any boosts! Thank you so much for your support!

Comment & Rating (477)

@RachelVee

Boosted

Print Profile

0.1mm layer, 2 walls, 15% infill

Absolutely worth the 5ish hour print time! I was terrified that my nozzle would pick up and ruin the whole print especially since I printed on a smooth plate and directly from my phone. I am so beyond happy that it didnt mess up at all! 😍😍😍

@kalamalkaprint

I hate it when my nozzle picks the print up

@Nursomancer

Umm, wtf is this filament??

@RachelVee

Boosted

Replying to @Nursomancer :

hahaha it was just regular black filament but it’s all rainbow and shiny cause of the plate I printed it on

@Booga1

Boosted

Print Profile

0.1mm layer, 2 walls, 15% infill

Printed flawlessly using PETG with a 0.4 nozzle and 0.2 layer height. I was feeling a little nervous taking it off the plate, but it came off intact. After seeing this I am wondering about trying it in TPU.

@3dprinternerd

It's a lot of fun in TPU!

@bink3d

Boosted

Any trick you used to get it off the plate? Did you use the textured plate?

@Booga1

Boosted

Replying to @bink3d :

Yes, I used the textured PEI plate. My process: 1> Let the plate to cool completely down first. 2> Removed the plate from the heatbed 3> Flexed the plate gently 4> Pushed a scraper inward against each edge until I hit resistance. 5> Slowly peeled the fabric back by rolling fingertips under it to dig at individual links, working in line with the "grain" of the fabric. If I felt I was hitting too much resistance, I'd rotate the plate and work at it from another angle.

@kyenzo

Print Profile

0.1mm layer, 2 walls, 15% infill

wouldnt print good and had to scratch it of 3 times makes a crazy mess

@erSandrone

If 100 people have successfully printed it and only one person hasn't, isn't that the single person's issue? I don't see why a one-star rating is necessary

Show original

@3dprinternerd

Replying to @erSandrone :

Almost 2,000 people now.

@user_258182411

you didn’t finish the print!

@j.erb

Boosted

Print Profile

0.1mm layer, 2 walls, 15% infill

This is my favorite fidget style print so far! Printed on A1 Mini @ 50% speed

@lemone_466

How long does it take to print at 50% speed? I have an A1 mini so it would be handy to know

@j.erb

Boosted

Replying to @lemone_466 :

It took 8.4 hours 🥹

@lemone_466

Replying to @j.erb :

thanks! 🤩

@nightman

Print Profile

0.1mm layer, 2 walls, 15% infill

great print, very satisfying

@3dprinternerd

Good! Enjoy!

@user_2538771648

how does yours look so thin?

@3dprinternerd

Replying to @user_2538771648 :

They are all that thin

@bink3d

Boosted

I've NEVER had bed adhesion issues before, but this print changed that! After a massive mess, I cleaned the build plate well, tried again, and had success! Would you mind creating a dual color version?

(Edited)

The designer has replied

@3dprinternerd

What kind of dual color?

@bink3d

Boosted

Replying to @3dprinternerd :

I've seen some related prints that have the top and bottom halves a different color.

@3dprinternerd

Replying to @bink3d :

Okay, I can do that

@TechnicallyWes

Print Profile

0.1mm layer, 2 walls, 15% infill

printed in tpu 95a, just amazing!

@sparksahazard

I’m planning to do this tonight!

@user_3826497753

Print Profile

0.1mm layer, 2 walls, 15% infill

so so so so so so cool. It was amazing. IT IS A LITTLE HARD TO TAKE IT OFF THE BED PRINT.

@bink3d

Boosted

Any trick you used to get it off the plate? Did you use the textured plate?

@user_3826497753

Used a textured PEI plate You kinda have to take it off piece by piece in the beginning, but you can also pull it off slowly. The prints design is very sturdy

@SorinM

Print Profile

0.1mm layer, 2 walls, 15% infill

worked our second time. we tried once, we had bed adhesion issues, so we fixed it and it worked the second time. no issues with anything breaking.

@bink3d

Boosted

How did you fix it? Any challenges getting it off the build plate?

@SorinM

Replying to @bink3d :

cleaned with alcohol and dried thoroughly. no issues getting it off the plate. let it cool completely and gently removed.

@BubblesFishy

Print Profile

0.1mm layer, 2 walls, 15% infill

This fidget fabric feels unreal, this is a must-print.

@3dprinternerd

Thanks for the review!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.