LRS350 Power Supply case -Btech_50X2 DMRS Radio
Print Profile(2)


Description
This is a case for the popular LRS350 12 volt, 30 amp power supply. Its commonly used in 3d printers. Remixed from original by Fintech https://www.thingiverse.com/thing:4944127. I remixed it to make it larger and make the holes for the power supply lineup properly. I did this so it could be used with the B-TECH 50V2 or B-TECH 50X2 mobile GMRS and Ham mobile transceivers as a base station. If you look at the pictures you can see the radio mounts on top of the enclosure. Both radios are identical physically so there is no difference in mounting. I used the same power connector the radio came with so that it can just be unplugged and a cigarette lighter plug or direct connection lead can be plugged in to make it a mobile station again . The mobile mounting plate that came with the radio is used to mount it.
Power socket : You will have to bend the tabs to get clearance for the connections
12 volt connector
12 volt cigarette lighter cable for BTECH 50x2 or 50V2
B-TECH Ham Radio Transceiver 50X2
B-TECH GMRS Radio Transceiver 50V2
Mounting screws for the LRS350 m4x6mm 4ea , Case screws m3x12 4ea , Case screws m4x12 2ea
Buy the assortment below to obtain the above screws















Comment & Rating (0)