Flexi Corn Cob - Pencil case by 3dneticMakerWorld: Download Free 3D Models

3dnetic

Household>Office

IP Report

Print Profile(2)

All

H2D

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 6 walls, 15% infill

Designer

11.5 h

4 plates

4.4(69)

0.2mm layer, 6 walls, 15% infill with outer brim

Designer

11.1 h

4 plates

4.4(19)

Open in Bambu Studio

Boost

1137

1828

248

387

2.8 k

1.1 k

Released

Description

Membership

Join

Please consider giving me a BOOST to help me keep making free files.

Flexi Corn Cob is perfect pencil case and a fun fidget toy. Since it’s designed to be printed in place without supports, it should be a straightforward print.

Please dont print the whole model - test your filament first. I would strongly recomend to use new spool for this model.

Easy way to open it - is to deacrese your normal printing temperature by 5-10 degrees.

Please dont use sharp tools.

As always, if you encounter any issue, please let me know in comment section.

Here is a short videos with demo:

https://youtube.com/shorts/9oDmmgJPvfA

https://youtube.com/shorts/Ldp0Z6DAWYs

Case for Flexi Corn Cob is here:

https://makerworld.com/en/models/1259715-case-for-flexi-corn-cob#profileId-1283865

Another versions of this Flexi Corn with different heights and gaps are avalaible on my patreon:

https://www.patreon.com/posts/flexi-baby-corn-123720841?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link

Please Like and Follow on youtube if you would like to see more projects:

https://youtube.com/@3dnetic?sub_confirmation=1

more awesome models here:

https://makerworld.com/en/@3dnetic

Boost Me (for free)

And thanks for boosting my projects, remember that the good vibes will find their way back to you.
Let’s create a positive ripple effect on MakerWorld.

Bill of Materials

Bambu Filaments

Yellow

A00-Y0-1.75-1000-SPLFREE

19.99 USD

× 1

Cobalt Blue Metallic

A02-B2-1.75-1000-SPL

27.99 USD

× 1

Buy Now

Download BOM

Comment & Rating (248)

@jekatilla

Print Profile

0.2mm layer, 6 walls, 15% infill

Magnificent

The profile uploader has replied

Show original

@3dnetic

Great job! Thank you for sharing the pictures! Is it Bambu Basic PLA? what temperature did you apply?

@jekatilla

Replying to @3dnetic :

This is PETG. Temperature 140

Show original

@3dnetic

Replying to @jekatilla :

do you mean 240?

@smigi13

The print profile is no longer public

Bed Adhesion Issue:sorry, twice and it fell down... i made a brim and you need put it into profile to be just printable from app

The profile uploader has replied

@3dnetic

or mayby just clean your print bed and use a glue stick.

(Edited)

@lovecoexists

Replying to @3dnetic :

brim in the profile seems worth it. sending good vibes ✨️

@3dnetic

Replying to @lovecoexists :

thank you for your support! : )

@user_115828254

Excellent results as a hand fidget, but unsuitable as a pencil case

The designer has replied

Show original

@3dnetic

why not?

@connoryamsek

Replying to @3dnetic :

Because both ends are sealed. Unless I am doing something wrong (likely), the bottom of mine is sealed shut with your logo on it. Great print but the pics/vids do not show opening the bottom for the 1st time.

@3dnetic

Replying to @connoryamsek :

you are right there is internal brim at the bottom, just cut it out.

@arasaka.inc

Boosted

Print Profile

0.2mm layer, 6 walls, 15% infill

Great! Printed with Eryone Rainbow PLA, 210°

The profile uploader has replied

@3dnetic

thanks a lot for sharing! did you print on A1?

@arasaka.inc

Boosted

Replying to @3dnetic :

No, on P1S

@3dnetic

Replying to @arasaka.inc :

perfect!

@user_4239852540

The print profile is no longer public

It printed OK but it was so easy to remove, even immediately after the print ended. It felt like it was about to let loose. I would add a brim, just in case, since the piece is so tall and the base is relatively small. I ordered a super tacky bed plate for cases like this. The screw-like part, used to separate the bottom rows, is too tight a fit. I would scale it down to 96%. I didn't use it. I separated each corn 'kernel' using a sharp wedge tool. The bottom screw-in cap is OK.

The profile uploader has replied

@3dnetic

thank you for 5 stars and for sharing your experience!

@johnomaz

Boosted

I was very curious if it would actually separate like expected. Yes, it did. It was scary to bend and twist it but it started to separate. I eventually discovered you are supposed to be cut out the bottom center carefully in order to use the threaded cap. 10/10, love it for its uniqueness and clear phallic nature. Even my 3D printed clone of my actual dog is curious.

The designer has replied

@3dnetic

Hi John, the best comment ever!! thank you for your support!!

@Hurricanedj

Boosted

Hey, do you happen to have the link to that Pitty?

@johnomaz

Boosted

Replying to @Hurricanedj :

https://cults3d.com/en/3d-model/art/baby-flexi-dog-keychain-set-3-set-of-10 The creator has several sets of flexy dogs and they are all amazing. I spent like $20US for all the sets with dogs and printed almost all of them in multicolor. Needless to say everyone got a flexi dog as part of the bow/nametag last Christmas. I painted the model in BambuStudio to look like my actual dog. https://immich.mazzina.us/share/b-oJtzCI39jSoBUrKtYj5Th9WmztbbNxY2F2xk4CsJPtmbfdXWEfCbX_gGkP20SGoMU

@My1stvmax

Boosted

Print Profile

0.2mm layer, 6 walls, 15% infill

Too cool to not print. Very easy print, turned out perfect. I did it in abs because that's what I had in yellow.

The profile uploader has replied

@3dnetic

it is probably much more stronger in ABS?

@My1stvmax

Boosted

Replying to @3dnetic :

It would be stronger over pla.

@3D2Life

Print Profile

0.2mm layer, 6 walls, 15% infill

Printedperfectly! No issues at all. Trying to break this up was tricky. I ended up breaking several of the connections in the process. So I repinted it. I read several of your recommendations and lowered the temperature to 205. It was still a bit tricky but it was easier to break them apart. I ended up using this 3d printed knife which fit the kernels perfectly to allow them to break free. It would be great to adjust the print temperature so it can be printed easier from handy app.

The profile uploader has replied

@3dnetic

thank you for sharing your experience!!👏👏👏

@pmhking84

Great design... Your flexi pine cone came out great and flexi as expected but this corn cob design is not flexi. It is like one STRONG corn cob. I only added 10mm of outer brim and leave other setting as is. Do you have any suggestion i can try?

(Edited)

The designer has replied

@3dnetic

do you see the gaps (dark blue lines) in bambu studio when you slice it? and if you use basic pla from Bambu then try to descrise your printing temperature to 205C.

@3dnetic

just need to do a little bit of filament temperature testing

@mtjtkt80

Print Profile

0.2mm layer, 6 walls, 15% infill

came out great. put put both fans on max speed and lowered my temp to 210. The only hard part of a part is the very top and struggling with, but I’ll get it.

The profile uploader has replied

@3dnetic

thank you sharing!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License