Reinforced Volvo Valve Spring Tool B230 B200 B23

NOTICE: Based on MesquiteAutomotive Design.
https://www.thingiverse.com/thing:3281365

I used hes design measurements as base and made a beefed up version as i got stronger valve springs than stock to install.
More chamfers and more plastic meat! Worked without a sweat on my Stiffer Valve Springs!
Use a steel square tube or a piece of flat bar with 55mm C/C distance between the holes for the handle.
Drill/Bolt size for connecting the pieces = 7mm i/d for M6 bolt.
There is room for a Long 13mm Socket to adjust the cam cap end piece aslong as the socket isnt larger than 20mm o/d.

PRINT 100% Infill so your retainer and valve components doesnt get airbourne if it breaks! Its 3D printed after all.
Print the Plunger standing up! And without supports or brim as there is already a brim in this .stl that you remove after printing with a knife!
Pictures will come when i change my broken spring.

V2 is out after a update where the plunger would hit the cam cap mount.

TIP!
If you dont want to remove the head from the engine just make an adapter from an old sparkplug without the porcelain so you can connect a air hose from a compressed air source and the valve will stay seated to the valve seat while you swap your springs! Varning! Engine may rotate when you connect the compressed air so keep the timing belt safe and fingers out from rotating components!!