Search models, users, collections, and posts
A1 extruder wheel mechanicus 40k
IP Report
Print Profile(1)
0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
Designer
47 min
1 plate
Open in Bambu Studio
Boost
154
435
34
16
386
256
Released
Description
This is a extruder wheel for the A1 extruder based on the logo of the adeptus mechanicus of the 40k universe.
Is recomended to print a maximun detail , and if you have a 0.2mm noozle is even better since with a 0.4mm noozle you cant get the detail of the teeth.
I made this print to use with mi other print that is a servo-skull cover but to be honest you cant see it that much , but is compatible with my cover and the standar cover.
It printed great but the hole might be a little too tight , i had to fiddle with my hobbyist knife for a couple of minutes for it to enter to the end.
I also added a multicolor option but since i dont have AMS i cant test that.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (34)