A1 mini side drag chain (updated) by Kar Fai

Kar Fai

3D Printer>3D Printer Accessories

GIF

Print Profile(11)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Updated V2.1 (PLA) 0.2mm layer, 3 walls, 30% infill

Designer

3.1 h

1 plate

4.8(789)

Updated V2.1 (PETG) 0.2mm layer, 3 walls, 30% infill

Designer

3.2 h

1 plate

Minimal custom support, one plate

2.9 h

1 plate

4.7(46)

0.2mm layer, 3 walls, 15% infill

3.7 h

2 plates

4.8(29)

Click to see more

Open in Bambu Studio

Boost

2928

6724

1519

1.2 k

10.4 k

7.9 k

Released

Description

Boost Me (for free)

Please feel free to support me for more design :)

Updated 2.1 (18032025):

Chain with tighter chain clip.
Additional adjustment chains +-4mm.

Z Aixs drag chain system has been updated with new chain, top and bottom mount to be much simpler, cleaner and doesn't require any additional parts.

Update design was inspired by Andrews work.

https://makerworld.com/en/models/835521#profileId-780687

The print profile shared would be slightly slower but it's set to be the most stable and lowest risk of failed print. For best print outcome, PLEASE clean your build plate with alcohol wipe for best bed adhesion/print outcome.

A1mini side drag chain mount parts list:

Top mount - 1

Bottom mount - 1

Bottom mount clip - 1

Drag chain - 13

Drag chain Clip - 13

Additional shorten clip to fit and adjust length for slight difference in cable length.

+4mm chain link and clip

-4mm chain link and clip

Comment & Rating (1519)

@dominik.gneist

Boosted

Print Profile

Updated V2.1 (PLA) 0.2mm layer, 3 walls, 30% infill

Works perfectly! Many thanks for this cable guide!

Show original

@pdesign

Did you create a cutout in the raised edge of the storage box to make it fit, or did you solve it differently/better?

Show original

@dominik.gneist

Boosted

Replying to @pdesign :

Yes, I simply cut away the interfering contour from the storage box with wire cutters It still doesn't quite fit perfectly, but I preferred this design to the others

Show original

@Zahmbie23

can you share the other printer accessories you have in there?

@Sartack

Boosted

Hello, Hello, Hello, Thank you for the chain, it is perfect When will you make one for the heated bed with a similar mesh? Have a wonderful holiday season

The designer has replied

Show original

@karfai

I will consider in doing the bed chain as I personally prefer to let it be as it's just a cable:)

@karfai

let me test it out and see how it goes

@Sartack

Boosted

Replying to @karfai :

Eagerly awaiting this

Show original

@hentorboeh

Unfortunately, the A1's design has been altered. Noise suppression is integrated at the bottom end. Therefore, the cable routing is incompatible at this point.

The designer has replied

Show original

@karfai

if any one can provide me with accurate measurement of the base I could design a mount for it.

@Mined

Replying to @karfai :

Oh! I thought so, the cable is more oriented towards the "outside." I just got an A1 a week ago... I was about to print it. What measurements do you need? Let’s talk and I’ll take them.

@karfai

Replying to @Mined :

after getting so many request for A1 drag chain I ordered 1 to design chains for😂might take a few weeks as it’s Chinese new year and will be cleaning and spending time with family this 2 weeks🙏🏻

@zalexz

Can you design for this one? https://makerworld.com/models/475631

The designer has replied

@karfai

Yes, I'm thinking of design a cover to remount the camera. Probably will be out within the next 2 to 3 weeks.

@zalexz

Replying to @karfai :

Thank you

@user_515183330

Boosted

Replying to @karfai :

was just about to ask, very much wanted upgrade, still going to just print this one for now tho, very clean design.

@user_2865511048

Boosted

the receiver doednt flush properly with the box

@user_2865511048

Boosted

it would be great to consider making the modifications so it works with the storage box https://makerworld.com/en/models/796947#profileId-736204 love your work designs

@Flook

Boosted

Replying to @user_2865511048 :

Same. I just did some cutting and sanding to make it work with that same storage mod.

@Lightspeed50

Same here, if we can get a design to work with that stackable storage would be great !

@andre.bar

Boosted

Very nice design. Love it. Made a profile without generated support. Maybe not necessary, but I saw this tree support and said in my mind - challenge accepted :-D Turned out well.

The designer has replied

@karfai

great job!!!!

@stillphill

Are the nozzles also reinforced? Mine unfortunately break after a short time… Bambu PLA Matte

Show original

@user_3386366475

Boosted

The print profile is no longer public

Could easily be reduced to a two plate profile and still include a couple of spare links. Mine clipped together a bit tight, could use a few millimeters of slack. The z-axis base and gantry snap print beautifully though!

(Edited)

@IhorHryniv

Thnx, replaced to two plate profile

(Edited)

@user_3386366475

Boosted

Replying to @IhorHryniv :

Oh cool! wasn’t even expecting the change, was just mentioning it for other A1 mini owners. Thanks for the fast update and I’ll boost!

@eiskreuz

Boosted

I downloaded the dual color cover project from printables, imported just the cover from this download at the same position and merged them. https://www.printables.com/de/model/929869-bambu-lab-a1-mini-x-axis-motor-front-cover/files

(Edited)

@martinno

Would be great to combine this face plate with cable organizer from https://makerworld.com/en/models/104167#profileId-402354. This would create almost genuine looking product :-).

@crofton77

Any Chance of getting the file with them merged?

@enriquem50

Please share the file with us. It would be greatly appreciated

@aero_spaced_out

Boosted

A1 Mini - clips holding the back of the chain are very loose and pop off when it moves... any recommendations for print settings to fix? EDIT: Printed the clips to 97% scale as per a previous comment and this was no longer an issue. The design is still brilliant. Just be sure to remove all skirt material to get a proper fit.

(Edited)

The designer has replied

@karfai

I’ll upload a updated chains that has tighter tolerances and different length for adjustments. sorry for the issue🙏🏻

@aero_spaced_out

Boosted

Replying to @karfai :

Not a problem. I had a skim down the comments and seen a recommendation to print the clips to 97% scale. Just done that and it works perfectly. It's still a brilliant design. I will edit my original comment and rerate accordingly.

(Edited)

@karfai

Replying to @aero_spaced_out :

I've just uploaded V2.1, it has updated chain with tighter chain clip and Additional adjustment chains +-4mm.

@stillphill

Is it possible to create a reinforced version of the lower part? Mine has broken three times already… always in the same place. Otherwise, the chain is truly perfect and beautiful. Printed with Bambu PLA Matte That would be fantastic, just a bit more substantial in that area. Best Regards Philipp

The designer has replied

Show original

@karfai

hm is the filament dry? did you try printing with other filament? I’ll come out with a stronger version.

@stillphill

Yes, the filament is dry I have used the entire spool over the last two days without any issues I haven’t tried it with other filaments yet as I want the printer’s aesthetic to remain consistent It would be wonderful if you could do this It broke right at the edge

Show original

@karfai

Replying to @stillphill :

you can try printing it in this orientation someone with the same issue got it working with just printing orientation change.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License

Related Models

Drag Chain L18mm

jkoczera

A1 Bed Drag chain / Cable Chain

Kar Fai

351

489

Shamrock Chain

ClintonGid

letter bead chain

yahbluez