A1 + A1 Mini Snowflake Extruder Icon Wheel - Free 3D Print Model

Search models, users, collections, and posts

Andrew

3D Printer>3D Printer Accessories

IP Report

GIF

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Creator Recommended | 0.2mm layer, 2 walls, 15% infill

Designer

9 min

1 plate

4.5(16)

Open in Bambu Studio

Boost

Released

Description

I made this so A1 and A1 Mini users can have a little bit of decor for their printers. This takes the same place as the original extruder wheel/icon.

Directions: Remove cover, use your nail or a small pry tool to remove the original icon, and replace with this snowflake one.

Boost Me (for free)

I put a lot of time, effort, and filament into my designs to ensure they work well and efficiently. Boosting my models helps me out significantly, and its free for you!

Comment & Rating (25)

@ZenithUK

Print Profile

Creator Recommended | 0.2mm layer, 2 walls, 15% infill

It's a pretty little snowflake!

The profile uploader has replied

@Andreww

cool looking cover

@ZenithUK

Replying to @Andreww :

Thank you. It's this model https://makerworld.com/models/625766 with a magnetic quick release plate.

@Rcsidewinder

a little loose but left it on and put cover back on and works just fine

@Mark1323

Print Profile

Creator Recommended | 0.2mm layer, 2 walls, 15% infill

needs to be a bit tighter

@flickeringiroam

Print Profile

Creator Recommended | 0.2mm layer, 2 walls, 15% infill

prints well, fits well

@ilos

The mounting hole is likely too large for my A1 mini, the snowflake moves excessively (PLA opening)

The designer has replied

Show original

@Andreww

I believe this would be because of difference in extrusion, you might be under extruding a little , you can try scaling the model down slightly

@ilos

Replying to @Andreww :

I will try, thank you for the advice :)

Show original

@Niklas_Noel

It printed quickly and fits perfectly

Show original

@user_639163356

Print Profile

Creator Recommended | 0.2mm layer, 2 walls, 15% infill

Perfect Print! Thank you!

@user_639163356

Perfect Print Thank you!

@GATTOPAZZO

Print Profile

Creator Recommended | 0.2mm layer, 2 walls, 15% infill

a bit long

Show original

@user_2943259633

Print Profile

Creator Recommended | 0.2mm layer, 2 walls, 15% infill

Nice!👍

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.