Test Supports
Print Profile(3)
Description
Support Test.
This support test assists in determining optimal settings for your filament.
The test was designed to evaluate varying upper interface Z Heights across five samples for easier support removal.
For enhanced supported surface quality, the upper interface layer count and line spacing were adjusted.
This test serves as a demonstration; select the settings most suitable for your application.
Customize the samples by removing the pre-set values and entering your chosen parameters.
Automatically generated tree supports were employed.
Printing was exclusively conducted with Bambu Lab PLA, though any material and support type may be tested.
Print in PLA and support in PETG solely for the upper interface, with a 0mm Z Height, for a cleaner surface finish.
Alternatively, dedicated support filaments are available.
The print features five samples, each with a 90° overhang and marked with its Z Height.
The slicer was configured “per object,” so exercise caution when making adjustments.
A recent update involved testing a curved surface with standard, automatically generated supports.
In this instance, print speed was modified in addition to support settings.
Print, test, and save your values for future prints
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (132)