Manifold3D

0.2mm layer, 2 walls, 15% infill PETG-HF printability fix

Printed without issue, nice to have this model so I can have hanger on both sides. Only improvement could be better radius on the top inside to more closely match the machines radius.

0.2mm layer, 2 walls, 15% infill

Hey! I had the same thought and ended up modeling my own version inspired by this, you might want to check it out here: https://makerworld.com/en/models/1097949#profileId-1092716

Printed great in PETG. Fits perfect. I used a bit of double sided tape so it doesn’t move. Thank you! 

TheBorst

sumerman

Since the cutout faces down it creates the need for extra supports that make the final result quite a bit messier than it has to be. I suppose it wasn't as big of an issue for PLA, but PETG-HF ended up unsightly. I have attempted to remedy this by uploading my own profile.

TriWulffDelta

Worked well! Tidies up my counter nicely, and blends in to the machine since I used a black filament

FurryOtaku

Vielen Dank für diese perfekte Lösung! Um etwas Support zu sparen habe ich die Ausrichtung auf der Platter geändert. Nun ist der Ausschnitt oben.

Thank you for this perfect solution! To save some support material, I changed the orientation on the bed. The cutout is now at the top

Milu

Ryan Ramsey

cover

20241122_112608.jpg

20241122_112614.jpg

Left

plate_1.png

Right

plate_2.png

2024-11-22_4f77eb0e02196.jpg

tempImage5F0j3w.jpg

tempImageuP0jDx.jpg

tempImageobBnDc.jpg

I've tried printing this in PETG-HF and built-in profiles don't do well with steep overhangs even with supports. So, this profile does three things:&nbsp;<ul><li>it limits the outer wall speed which mainly benefits PETG-HF</li><li>flips the model with the cutout facing upwards, thus reducing the amount of supports required, this should benefit PLA prints as well as PETG-HF</li><li>applies adaptive layer height to smooth the rounded parts &nbsp;</li></ul>Upd: made applied my changes to both plates

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Justin

Breville Portafilter Hanger

The original is one of my top favorites. For the Breville Barista Express, there is a wheel to the side that is partially covered by the original. All I did was add a negative space specifically so the wheel can turn freely.

Print Profile(2)

Description

Comment & Rating (8)

This remix is based on

License