Fidget Spinner by YankeePrintsMakerWorld: Download Free 3D Models

YankeePrints

Toys & Games>Other Toys & Games

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

0.16mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

4.7(88)

Open in Bambu Studio

Boost

506

828

116

1.3 k

828

Released

Description

Fidget spinner with cool designs on the caps.

super easy print.

use a duel or a Tri color filament for best results

Boost Me (for free)

because you want to.

Membership

Want to sell this model? Join my commercial membership!

Join

Comment & Rating (116)

@LP_26

Print Profile

0.16mm layer, 2 walls, 15% infill

Printed reasonably well. I'd seen comments that the design on top didn't print out, but that suited my purpose anyway, as I simply wanted to check the filament on this plate. no settings changed.

The profile uploader has replied

@YankeePrints

I can see the pattern on yours.

@LP_26

Replying to @YankeePrints :

only thing O can see is the imprint off the build plate. I turned the plate over in the slicer and there's nothing there.

@YankeePrints

Replying to @LP_26 :

after you sliced it? I can see the pattern on yours no problem, its how the first layer is put down. you will be able to see it in the preview screen after you slice it. if it isn't there then you can change it in the first layer pattern option.

@ultima_hef

Boosted

Thank you for broadening my horizons, showcasing the myriad possibilities of 3D printing <3

Show original

@virtuosoh

dude you HAVE to tell me what filament this is. reminds me of the old iMac

@ultima_hef

Boosted

Replying to @virtuosoh :

This is Bambu Lab PETG Translucent Türkis (Teal) Filament Code: 32501

(Edited)

@XNVM

about 7 years ago when i first designed a fidget spinnder to have bearings in all the capped spots. i brought it into the machine shop, clamped it in a vice & used high power compressed air to get it spinning so fast it was screaming. it would up exploding. and sending 3 very fast moving bearings everywhere. good times.

@user_1473711161

hghfhjwiek

@Norkius

Print Profile

0.16mm layer, 2 walls, 15% infill

Great model and print, although the bearings are a tad loose, I understand why you may have done that on purpose. Thank you for the model!

The profile uploader has replied

@YankeePrints

I love that filament!

@Norkius

Replying to @YankeePrints :

Thank you! I just popped open the box yesterday and I've been a little too obsessed with it. Ziro tricolor matte.

@user_1451003259

Print Profile

0.16mm layer, 2 walls, 15% infill

All is well

Show original

@Relentlessly

Print Profile

0.16mm layer, 2 walls, 15% infill

Spins well!

@VladdieVlad

Print Profile

0.16mm layer, 2 walls, 15% infill

printer great in sunlu dual color pla plus.

@user_1234769803

Print Profile

0.16mm layer, 2 walls, 15% infill

So far so good. Just have to put it together!

@TaddeLcHen

Print Profile

0.16mm layer, 2 walls, 15% infill

That's cool Wonderful memories

Show original

@user_25462892

Print Profile

0.16mm layer, 2 walls, 15% infill

Perfect print Congratulations

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License