Dapper Skeleton - "Shaken, Not Stirred..."

Dapper Skeleton - "Shaken, Not Stirred..."

Sometimes skeletons just want to dress up and drink a martini - there's a quote on the bottom with “Shaken, not stirred… just like my bones”, to play up the dapperness and bring a bit of humor to the portrait. This is a super crisp print with very clean lines.

This is a large print at 163x225mm with 4 colors using Black, Purple, Morning Blue, and White. Feel free to replace the Purple and Blue with other colors, just be sure that your darker colors come first.

When slicing, if you get any warnings about floating regions you may safely ignore those!

You may scale this on the X/Y axis but NOT the Z axis - if you need a custom size, please let me know and I'll get a profile made for you. Otherwise, you can safely scale this down to 135mm without issues.

As you scale down the print time will drastically drop as well.

The print profile is setup and ready for an AMS to make this an easy print. If you do not have an AMS, simply remove the color swaps in the slicer and replace with pauses so you can change colors.

Want to sell physical copies of my designs? Head to my Patreon page for a license

Check out my other Halloween themed creations (or click the images below for some selections):

If you wish to print this yourself, look below at the settings:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.56mm
 

Filaments Used:
PLA Overture Black Transmission Distance: 0.7
PLA Overture Purple Transmission Distance: 1
PLA Overture Morning Blue Transmission Distance: 1.9
PLA Overture White Transmission Distance: 4.4
 

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Purple
At layer #14 (1.2mm) swap to Morning Blue
At layer #21 (1.76mm) swap to White for the rest.