Skeletons Trick-or-Treat Halloween

Skeletons Trick-or-Treat Halloween

Just your every day average Skeleton holding his pumpkin basket, ready for trick-or-treating!

This is a 115x200mm 4 color print using Black, Purple, Orange, and White. You can optionally omit the purple and orange and get a great print - or replace them with colors of your own!

When slicing, if you get any warnings about floating regions you may safely ignore those!

You may scale this on the X/Y axis but NOT the Z axis - if you need a custom size, please let me know and I'll get a profile made for you.

The print profile is setup and ready for an AMS to make this an easy print. If you do not have an AMS, simply remove the color swaps in the slicer and replace with pauses so you can change colors.

Want to sell physical copies of my designs? Head to my Patreon page for a license

Check out my other Halloween themed creations (or click the images below for some selections):

If you wish to print this yourself, look below at the settings:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.56mm

Filaments Used:
PLA Overture Black Transmission Distance: 0.7
PLA Overture Purple Transmission Distance: 1
PLA SUNLU Flourescent Orange Transmission Distance: 7
PLA Overture White Transmission Distance: 4.4

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Purple
At layer #11 (0.96mm) swap to Flourescent Orange
At layer #21 (1.76mm) swap to White for the rest.