Caught in a Web - Jack Skellington

Caught in a Web - Jack Skellington

This is my favorite hueforge print I have done yet - and it took a lot of work to create the spider webs. It features Jack Skellington caught in the middle of a spider web - and the cool part is it glows in the dark if you use a white glow in the dark filament. In this case I am using Sunlu White PLA that glows blue. It looks awesome when you let it absorb some light! I really hope you enjoy this creation, definitely share your prints if you go for it :)

Don't want it to glow in the dark? No problem - use any white filament.

Update - I have added a profile for the A1 Mini!

Want to browse some of my other creations?

Check out my other Halloween prints here!

Check out all my hueforge prints here!

Want to sell physical copies of my designs? Head to my Patreon page for a license

All the print settings you need are setup in the print profile, but if you wish to do them yourself see below!

You may scale the print on the X/Y axis but NOT the Z axis. If you need a custom size and aren't sure what to do, let me know and i'll create the profile for you.

The last color in the swap instructions is black again (layer 29, 2.4mm), and this is used only for the top border color. Feel free to swap that out for any color you want the border to be and it will not affect the rest of the print.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA Overture Black Transmission Distance: 0.7
PLA SUNLU Grey Transmission Distance: 8.1
PLA SUNLU Glow White (blue glow) Transmission Distance: 22
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Grey
At layer #13 (1.12mm) swap to Glow White (blue glow)
At layer #29 (2.4mm) swap to Black for the rest.