Spare Parts & Tools Organizer

Spare Parts & Tools Organizer is a very robust unit that can clean up your workspace and give those Bambu boxes a home-

Dimensions:

(Main body) 249x223x69

(Extension body) 249x223x49

(Main body small drawer) 108x62x37

(Main body large drawer) 126x62x37

(Extension body drawer) 241x92x36

Features:

(x10) small cardboard box holders

(x5) large cardboard box holders

(x2) front drawer boxes (great for loose baggies/spare hot ends/etc.)

(x1) extension body (to hold side drawer & digital caliper case)

(x1) extension body drawer box (great for pliers/post-it notes/ small cases/ etc.)

-Built in joint for super glue if you want the extension body permanent

-pre sized drawer boxes (no need to scale down)

*YOU DO NOT NEED TO PRINT THE EXTENSION BODY/EXTENSION BODY DRAWER BOX TO SAVE TIME & FILAMENT*

Filament used:

-Bambu Black PLA Basic

-Bambu Silver PLA Basic

Attention:

-I highly recommend using the supports that are pre-loaded for easy removal

-I left the fans on and door closed when printing all parts--not sure how impactful this is

-Clean, grease and calibrate your machine if you are due--this print uses the entire bed so ensure your machine is in good order

-Super Glue the recessed joint and press the extension body into its designated spot if you want it permanent

--Tread carefully changing infill/walls, I'm not sure how any of these parts will handle a negative change--

I plan on making a smaller version of this to be compatible with smaller build plates. I spent many hours revising this to try and make printing easier for the people downloading this, I have been a victim of files with poor settings, so rest assured I made this with love and care with you in mind. Any discrepancies seen in the photos is due to trial and error. Please give me feedback and show photos of your prints, I have many designs I would like to upload. This is the hypothetical “toe in the water”.

Thank you very much for checking this out and happy printing!

-Chad the dad