Compact Dice Tower - Free 3D Print Model

Search models, users, collections, and posts

BlakeT87

Toys & Games>Other Toys & Games

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Creality Ender-3 V2

0.16mm layer, 2 walls, 15% infill

Designer

4.2 h

1 plate

4.9(37)

0.2mm layer, 3 walls, 10% infill

Designer

8.8 h

1 plate

4.0(2)

Tight lid (open and close a few times to loosen it a bit)

2.8 h

1 plate

5.0(4)

Open in Bambu Studio

Boost

106

292

441

263

Released

Description

Compact Dice Tower

I designed this compact dice tower (smaller than a funko pop) to accommodate folks who want to take their dice tower with them on the go, but don't want to carry around a DUFFEL bag for their gear.

This has been designed with simplicity in mind, and serves its purpose very well. Even metal dice doesn't cause it to move around.

When closed, the dice tower can hold a standard set of polyhedral dice inside (and then some) without them falling out!

If you enjoy this, please share photos of your prints below!

Comment & Rating (84)

@tholaday

Print Profile

0.16mm layer, 2 walls, 15% infill

I want to like this neat little dice tower but I've printed the tower itself twice and have two complaints. 1) It should fit a little more snugly inside the tray. It's easy enough to fix that though. 2) The. side facing of the tower top wall (printed lying on it's side) is very fibrous/loose no matter what kind of support one uses. Maybe I should have printed it vertically?

The profile uploader has replied

@BlakeT87

Thanks for the rating and the comment. I actually print them just as they are in the print profile, with no supports at all. I understand that the bridge is a little far and definitely leaves a less than desirable result on the inside. However - this is a functional print, and I chose ease of printing over visual quality. This was one of my very first designs, and I do plan to go back and remake it eventually with some of the suggestions in this thread, so I’ll try to improve the next model with your suggestions.

@tholaday

Replying to @BlakeT87 :

Yep! I get it. It is indeed totally functional. And yeah, I tried it without supports and it wasn't much worse. So that makes sense to print it that way.

(Edited)

@BlakeT87

Check out the new profile by @bowlofrice - I have it printing now, but from his description it may have addressed the issues you had.

@bowlofrice

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Great print! I highly suggest printing the tower itself standing up with just one small support for the bottom opening (just use the automatic supports). It gives a much nicer finish. I also made the lid a bit tighter so the tower doesn't fall out. Now it can be used as a little container :)

The profile uploader has replied

@BlakeT87

Awesome! Thank you for the variation! I'm printing this version right now!

@bowlofrice

Boosted

Replying to @BlakeT87 :

Let me know how it went! For the one I printed, the lid was a bit too tight, so I actually tweaked it a tiny bit before uploading

@Xaverro

Print Profile

0.16mm layer, 2 walls, 15% infill

amazing

The profile uploader has replied

@BlakeT87

Thank you for the rating and the picture!

@Zez0000

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

perfectly functional

The profile uploader has replied

Show original

@BlakeT87

Thank you!

@BFFonseca

Print Profile

0.16mm layer, 2 walls, 15% infill

Small, practical and fits a set of dice. Perfect for playing somewhere with a small table space (we've all been there). Thank you!

The profile uploader has replied

@BlakeT87

Print looks great! Thanks for the rating! Also - Nice record player!

(Edited)

@drgnflms7

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Awesome print! would love to see a remix that adds some magnets for when it's stored for travel! Still a 5☆ print without em!

The profile uploader has replied

@BlakeT87

That's a great idea! I might have to try that out!

@user_2544425908

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Successfully printed and works perfectly

The profile uploader has replied

Show original

@BlakeT87

Thank you! Glad you like it!

@sved_2497

Print Profile

0.16mm layer, 2 walls, 15% infill

Dices rolling nicely.

The profile uploader has replied

@BlakeT87

Thanks for the rating and reply!!

@VoidbornTools

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

Support Issue:Ugly bridging on tower section, no supports. Ended up printing it again but re-orienting the tower vertically and adding auto tree supports for the opening at the bottom. This also hid the bed texture area on the bottom of the print. came out much cleaner.

The profile uploader has replied

@BlakeT87

Thanks for the feedback, feel free to upload your print profile :)

@VoidbornTools

Boosted

Replying to @BlakeT87 :

I tried, it won't let me, some kind of error about printer and or specific filament settings, never had a problem before, can't find the issue as of yet.

@honeylisa

Print Profile

0.16mm layer, 2 walls, 15% infill

The profile uploader has replied

@BlakeT87

Thank you for the rating! The red and yellow look great together!

(Edited)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Smash! The Auto-Reload Dice Tower

Rossero

24 k

11.5 k

Dice Tower Castle Stairs

squinn

17.5 k

4.9 k

GIF

Mechanical Dice

StatusSymbol

55.1 k

17.9 k

Compact Folding Dice Tower

Grove3D

1.2 k

567