Print-in-place ceramic capacitor organizer

The ceramic capacitor organizer has 6 drawers, each with 5 compartments, of which 25 are pre-labeled with common values. The dimensions are 240mm wide, 50mm deep, and 71 mm high. Each compartment holds more than 100 ceramic caps. The organizer can be attached to the resistor organizer https://makerworld.com/en/models/602199#profileId-524622 with tie wraps as shown in the photos.

This is the capacitor kit: https://www.dfrobot.com/product-431.html

The cabinet & drawers print all at once. Import ceramic_caps.stl and ceramic_caps_text.stl simultaneously into the slicer if you want colored text. ceramic_caps_no_labels.stl should be used if you want to make your own labels.

This model is based on my OpenSCAD model for parametric print-in-place drawers: https://makerworld.com/en/models/481479#profileId-397133