Print-in-place resistor cabinet

The resistor cabinet has 12 drawers, each with 5 compartments, of which 52 are pre-labeled with common values. The dimensions are 240mm wide, 80mm deep, and 140mm high. Each compartment holds at least 50 resistors on tape, probably 100 resistors loose. The print-in-place organizers can be tie-wrapped together as shown in the last photo.

Ceramic capacitor organizer: https://makerworld.com/en/models/602207#profileId-524629 

This is the resistor kit: https://www.amazon.es/-/pt/dp/B0B2CY3SW3/ or https://www.amazon.de/-/en/dp/B0B2CY3SW3

The cabinet & drawers print all at once. Import resistor_cabinet.stl and resistor_cabinet_text.stl simultaneously into the slicer if you want colored text. resistor_cabinet_no_labels.stl should be used if you want to make your own labels.

Thanks to Like, Download & Boost! This model is based on my OpenSCAD model for parametric print-in-place drawers: https://makerworld.com/en/models/481479#profileId-397133