Small smartphone stand - print in place design by mgm86

mgm86

Household>Other House Models

IP Report

Print Profile(6)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

Single color / Small (up to 11,5mm thickness)

Designer

36 min

1 plate

4.9(138)

Single color / Large (11,5 -> 13mm thickness)

Designer

38 min

1 plate

4.9(33)

Dual color (AMS) / Small (up to 11,5mm thickness)

Designer

5.4 h

1 plate

5.0(1)

Dual color (AMS) / Large (11,5mm -> 13mm thickness)

Designer

5.4 h

1 plate

Click to see more

Open in Bambu Studio

Boost

1015

1690

290

291

2.9 k

1.8 k

Released

Description

A small and easy to use smartphone stand for your keychain.

Features

Very simple. Only one step needed to use it
Small but not so small that it becomes unstable
With a hole for the keychain
Flat and round design when closed. So that it feels comfortable in your trouser pocket
Snaps into place when closed. No unintentional opening.
Print in place without support. No assembly required.
One and two colours (AMS only)

Sizes:

Small: For smartphones/cases with a thickness up to 11,5mm

Large: For smartphones/cases with a thickness from 11,5 to 13mm

There is an additional profile for size “up to 11,5mm” if you need too much force to open it. This depends on the chosen filament.

The "less force" profile works well with Bambulab PLA matte charcoal, for example.

Changelog:

23. February 2025: New profile “less force” released.

14. February 2025: Larger version for smartphones/cases from 11,5 to 13mm thickness released

11. February 2025: V2 released!
Model update with optimised contour and sligthly larger dimensions. It can now hold smartphones/cases with a thickness up to approx 11,5mm. And the V2 can also hold smartphones with rounder edges. A bigger version for thicker cases will follow.

Tips:

If you choose the dual color profile, I recommend to print 2 or more instead of only one stand. One stand needs 5h 22min. Two stands need ony 29min more (5h 51min).
Test the single color version with your smartphone before you print the dual color variant.
Press lightly on this area while opening if you have difficulty opening the stand:
If it is still too hard to open then please try the additional profil “less force”.

Comment & Rating (290)

@RetroWiz

Boosted

The print profile is no longer public

Although this isn't impossible to fix, I can assure you that this DOES work for the iPhone 15 Pro Max. The only issues are maybe: - lip isn't high/tall enough to hold the phone (it's barely clinging onto the edge of the device) - divot, where the phone sits in, ends too soon, also barely holding onto the back of the phone (similar to first issue) - it really could just be my phone case, which adds a bit of bulk to the device Great print though! Simplistic and does the job. :)

@mgm86

Hi, thanks for rating! Have you tested your iPhone without a case? Does it work better or worse? Maybe your case is just a bit too thick for the stand. I will soon be releasing a larger version for cases up to 14mm thickness. The overall height of the case will increase from 10mm to 12mm in the larger version.

@RetroWiz

Boosted

Replying to @mgm86 :

I’ve just tried it without the case, and it fits like a glove in both landscape and portrait mode. However, I’m not that daring to live life without a phone case. I’ll definitely be looking out for that updated version and let you know how that goes whenever I get my hands on it. 👍

@mgm86

Replying to @RetroWiz :

I‘am already testing the update. Hopefully I can upload it soon.

@user_2981101364

Boosted

iPhone 16 pro max with apple silicon case. it works perfectly in landscape but doesn’t want to hold in portrait.

The designer has replied

@mgm86

Hi, do you have a caliper? Could you measure the thickness of the silicon case? I want make a bigger version for thicker cases soon.

@user_2981101364

Boosted

Here you go. Let me know if you want any more measurements or if there’s a new model that I could try out for you.

@mgm86

Replying to @user_2981101364 :

Thank you! That helps me a lot!

@Julosor

Boosted

Superb phone stand, remarkably stable even in portrait mode, elegantly simple in design yet exquisite, I adore it I've experimented with several materials, PLA silk boasts the smoothest finish while PLA wood proves the most rigid (very difficult to open), and PLA matt is average (still somewhat difficult to open, though less so than PLA wood)

The designer has replied

Show original

@mgm86

hi, very nice! Regarding opening Problems: See tips section. Just push left from the flap while opening.

@Julosor

Boosted

Replying to @mgm86 :

Thank you, I will test it 👍

Show original

@user_2725104415

Hello - Ive printed one copy - I cannot believe how stable it is with the iPhone 15 in a silicon case - Its perfect. Can I check; is the 'flip section' difficult to flip out - I have to stick a small knife to flip it out - Ive tested it with some other android phones - that have slightly thicker cases - and the lip of the stand might be a bit small - but for the basic iphone 15 - its perfect - Thank you

(Edited)

The designer has replied

@mgm86

A version for bigger cases as 11,5mm will follow. Could you measure the android phone cases? That would help me for the bigger one. Regarding "dificulties to flip out": See the updated tips section.

(Edited)

@user_2725104415

Replying to @mgm86 :

I discovered the 'push place' after I wrote my comment - Yes - a slight push on the lip (downwards), while lifting the arms- and it opens very easy THe Android with silicon case is 9.5mm - The iphone with case is 10.5mm

@skeptem

Print Profile

Single color / Small (up to 11,5mm thickness)

came out great if a bit hard to open

@mgm86

Do you read the tips section?

@DanMat

Print Profile

Single color / Small (up to 11,5mm thickness)

The print was perfectly successful, a fantastic idea 👌

Show original

@mgm86

Danke

@Thiboterham

Boosted

Print Profile

Single color / Small (up to 11,5mm thickness)

can’t have enough of these, great print!

@mgm86

Thank you =)

@JonoB

Boosted

Print Profile

Single color / Small (up to 11,5mm thickness)

Clean print that functions as intended!

@mgm86

Thank you!

@zentenro

Print Profile

Single color / Small (up to 11,5mm thickness)

Nice design.

@mgm86

Thank you

@rafacandalaft

Boosted

Version 2 works perfect for me, Galaxy S24. Beautiful job!

The designer has replied

@mgm86

Nice to hear 🤗

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.