Search models, users, collections, and posts
萝卜蝴蝶刀（短款）Carrot Balisong（Short model）
IP Report
Print Profile(5)
0.2mm layer, 2 walls, 15% infill
42 min
1 plate
0.2mm layer, 2 walls, 15% infill
1.5 h
2 plates
Corn version - 0.2mm layer, 2 walls, 5% infill
1.5 h
1 plate
0.2mm layer, 2 walls, 10% infill
44 min
2 plates
Click to see more
Open in Bambu Studio
Boost
447
736
44
14
1.4 k
423
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Description
您好，如果您打算下载此模型，请考虑留下赞、发布制作、留下评论甚至捐赠。谢谢！
Hi There, if you plan on downloading this model please consider leaving a like, posting a make, leaving a review, or even a donation. Thank You!
我精心设计了这把萝卜蝴蝶刀的所有细节，你可以在不使用任何额外支撑的情况下完美的打印这个模型，但是你可能需要用到4个M3*6的平头螺丝。其中你需要打印两个"叶子(短)"零件，总共是三个零件。注意：在打印的时候你可能需要注意“叶子(短)”的打印方向，将不需要支撑的面做为底面。
I have carefully designed all the details of this Carrot Balisong so that you can print this model perfectly without any additional support, but you may need to use 4 M3*6 flathead screws. In which you need to print two "叶子(短)" parts, for a total of three parts.Note: When printing, you may need to pay attention to the printing direction of the "叶子(短)", using the side that does not need support as the bottom surface.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (44)