Expandable Bosch 18V Battery (6-10) - FLIP HANDLE - Free 3D Print Model

Search models, users, collections, and posts

Armadiaboli

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.24mm layer, 4 walls, 10% infill, partial support

Designer

20.9 h

4 plates

4.9(14)

Open in Bambu Studio

Boost

102

337

421

125

Released

Description

I wanted to have a moveable handle, to lay it flat if the tray is in the shelf but one that will stand if I have the tray outside at work.

The design is made for 6 or 10 batteries. More would be possible if I remix one part, but I think it makes no sense because it will get heavy then.

On my A1 mini the parts have a snug fit. It could be that you have to carve the edges of the handle rotation points a bit, depending on how easy you want to move it.

It was printed with PETG in black from Jayo.

To mount the tray, you have to take the two parts with one hinge on the top ("out 6" or extension “10”, put in the handle an lay it flat on the side.

Then slide the “middle” part from above over the dovetails and press it down (in my case it snapped a bit). I added M3 fusion threads to screw it from the bottom, but it is optional.

I would be happy about likes, comments, downloads and maybe some boosts :D

Comment & Rating (30)

@BiMein

Boosted

Print Profile

0.24mm layer, 4 walls, 10% infill, partial support

Now the batteries finally have their perfect place too Thank you

Show original

@user_1934701747

Boosted

Print Profile

0.24mm layer, 4 walls, 10% infill, partial support

Printed well and works great. Thank you, this will now keep all my batteries in one place, unlike now where they are all over the place. I will be adding the inserts, when I can find them :)

@Fatmax

It looks great! Does it fit also for Bosch Green (18V POWER FOR ALL) batteries?

The designer has replied

@Armadiaboli

hi, unfortunately not. Maybe I'll do one in the future.

@Labelius

Replying to @Armadiaboli :

I have made such a conversion and optimized it for the Allin 18v batteries If you have no problem with that I am happy to upload it

Show original

@Armadiaboli

Replying to @Labelius :

Hello, sorry but the digital standard licence allows no remixes.

@markuskitzinger

Hello Unfortunately I cannot find the handle in the file and it is not being printed

The designer has replied

Show original

@Armadiaboli

Indeed, I will upload it today or tomorrow

Show original

@Armadiaboli

If you need it quickly, the one from my Makita battery holder also fits They are identical

Show original

@Armadiaboli

@markuskitzinger The handle was in the file, just hidden. But it was shown to me shaded on the PC. It's now activated and should work

Show original

@cpl77

Hello great model for 6 but I'm failing to see how the extension to 10 would work how it is currently designed. It seems like you're missing a model that you have in your Makita one.

The designer has replied

@Armadiaboli

hi, thank you. I will check and add the missing one

@Armadiaboli

hey, I just added the missing part. You can keep the middle part and the grip. Then you have to print the two optional print plates

@kalafos_1974

A question would it be possible to have the same model but for HILTI batteries

The designer has replied

Show original

@Armadiaboli

unfortunately I have no Hilti batteries to check it, sorry.

@markuskitzinger

Print Profile

0.24mm layer, 4 walls, 10% infill, partial support

After the handle could also be printed on plate 2, a great carrying package for up to 6 batteries! Thank you for that!

The profile uploader has replied

Show original

@Armadiaboli

Thank you!

@arthoz

Print Profile

0.24mm layer, 4 walls, 10% infill, partial support

Excellent, no more putting batteries in pockets and hands

@Freakazoid89

Print Profile

0.24mm layer, 4 walls, 10% infill, partial support

Simply awesome! Thanks for the idea and for making my life easier XD

Show original

@Neiki85

Boosted

Print Profile

0.24mm layer, 4 walls, 10% infill, partial support

very nice print everything great Would also be happy about a 12V adapter then you can mix :-) Thank you very much Boost follows :-)

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.