4x2x5 Bin | Lable | Gridfinity | Deskorganizer | Tool | select2stertPrint - Free 3D Print Model

Search models, users, collections, and posts

select2start Print

Tools>Organizers

IP Report

GIF

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Fast Print 0.2mm layer, 1 walls, 4% infill

Designer

1.6 h

1 plate

4.7(12)

Fast Print 0.2mm layer, 1 walls, 4% infill

Designer

1.4 h

1 plate

1.5(2)

Dual color, 0.2mm layer, 1 walls, 4% gyroid infill

1.7 h

1 plate

Open in Bambu Studio

Boost

138

Released

Description

Links to alle the models so far:
(on the Bambu handy App there is a problem where you are direkted to the browser
… i already did kontakt the support, so i hope it will be fixt soon.)
Base	1	2	3	4	5
1	1x1
2	2x1	2x2
3	3x1	3x2	3x3
4	4x1	4x2	4x3	4x4
5	5x1	5x2	5x3	5x4	5x5

Higth 2,5	1	2	3	4	5
1	1x1x2,5 Bin	1x2x2,5 Bin	1x3x2,5 Bin	1x4x2,5 Bin	1x5x2,5 Bin
2	2x1x2,5 Bin	2x2x2,5 Bin	2x3x2,5 Bin	2x4x2,5 Bin	2x5x2,5 Bin
3	3x1x2,5 Bin	3x2x2,5 Bin	3x3x2,5 Bin	3x4x2,5 Bin	3x5x2,5 Bin
4	4x1x2,5 Bin	4x2x2,5 Bin	4x3x2,5 Bin	4x4x2,5 Bin	4x5x2,5 Bin
5	5x1x2,5 Bin	5x2x2,5 Bin	5x3x2,5 Bin	5x4x2,5 Bin	5x5x2,5 Bin

Higth 5	1	2	3	4	5
1	1x1x5 Bin	1x2x5 Bin	1x3x5 Bin	1x4x5 Bin	1x5x5 Bin
2	2x1x5 Bin	2x2x5 Bin	2x3x5 Bin	2x4x5 Bin	2x5x5 Bin
3	3x1x5 Bin	3x2x5 Bin	3x2x5 Bin	3x4x5 Bin	3x5x5 Bin
4	4x1x5 Bin	4x2x5 Bin	4x3x5 Bin	4x4x5 Bin	4x5x5 Bin
5	5x1x5 Bin	5x2x5 Bin	5x3x5 Bin	5x4x5 Bin	5x5x5 Bin

Higth 10	1	2	3	4	5
1	1x1x10 Bin	1x2x10 Bin	1x3x10 Bin	1x4x10 Bin	1x5x10 Bin
2	2x1x10 Bin	2x2x10 Bin	2x3x10 Bin	2x4x10 Bin	2x5x10 Bin
3	3x1x10 Bin	3x2x10 Bin	3x3x10 Bin	3x4x10 Bin	3x5x10 Bin
4	4x1x10 Bin	4x2x10 Bin	4x3x10 Bin	4x4x10 Bin	4x5x10 Bin
5	5x1x10 Bin	5x2x10 Bin	5x3x10 Bin	5x4x10 Bin	5x5x10 Bin

I used the GridfinityGenerator \| Fusion 360 \| Autodesk App Store that is made by Lev Mishin

The basis of Gridfinity a created by Zack Freedman
Gridfinity: Your Ultimate Modular Workshop is FREE!

I want to make the Gridfinity System more available for everybody, making it a one-button press experience.

Comment & Rating (16)

@PeterHall

Print Profile

Fast Print 0.2mm layer, 1 walls, 4% infill

Very nice, thank you! Made a small tweak for an accent color and added a print profile for that, in case anyone would like the same.

@FroztyBeverage

Print Profile

Fast Print 0.2mm layer, 1 walls, 4% infill

Other Issues:Poor quality. So many sections when the bottom part of the bin was printing were missing the connection to the walls (see pictures) and it left a ton of holes all around the perimeter near the wall. The bottom layers also look flimsy and have gaps.

@user_2699917048

Print Profile

Fast Print 0.2mm layer, 1 walls, 4% infill

fail with no explanation

The profile uploader has replied

@select2startPri

thanks for leaving an honest rating. I would always recommend to upload a picture of the printer. that Way I could figure out what to improve in the model or print profile. an Frome my experience other users a well will give advice when they the a potential cause of the problem.

@user_2699917048

Replying to @select2startPri :

it just failed -I never printed a layer of filament. the next attempt works great. I thought those ratings when to Bambulabs and focused on the printers not author of the model.