Gridfinity Base | Skelet | 3x3 | select2stertPrint by select2start Print

select2start Print

Tools>Organizers

GIF

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 20% infill

Designer

1.2 h

1 plate

4.3(6)

Boost

Released

Description

Links to alle the models so far:
(on the Bambu handy App there is a problem where you are direkted to the browser
… i already did kontakt the support, so i hope it will be fixt soon.)
Base	1	2	3	4	5
1	1x1
2	2x1	2x2
3	3x1	3x2	3x3
4	4x1	4x2	4x3	4x4
5	5x1	5x2	5x3	5x4	5x5

Higth 2,5	1	2	3	4	5
1	1x1x2,5 Bin	1x2x2,5 Bin	1x3x2,5 Bin	1x4x2,5 Bin	1x5x2,5 Bin
2	2x1x2,5 Bin	2x2x2,5 Bin	2x3x2,5 Bin	2x4x2,5 Bin	2x5x2,5 Bin
3	3x1x2,5 Bin	3x2x2,5 Bin	3x3x2,5 Bin	3x4x2,5 Bin	3x5x2,5 Bin
4	4x1x2,5 Bin	4x2x2,5 Bin	4x3x2,5 Bin	4x4x2,5 Bin	4x5x2,5 Bin
5	5x1x2,5 Bin	5x2x2,5 Bin	5x3x2,5 Bin	5x4x2,5 Bin	5x5x2,5 Bin

Higth 5	1	2	3	4	5
1	1x1x5 Bin	1x2x5 Bin	1x3x5 Bin	1x4x5 Bin	1x5x5 Bin
2	2x1x5 Bin	2x2x5 Bin	2x3x5 Bin	2x4x5 Bin	2x5x5 Bin
3	3x1x5 Bin	3x2x5 Bin	3x2x5 Bin	3x4x5 Bin	3x5x5 Bin
4	4x1x5 Bin	4x2x5 Bin	4x3x5 Bin	4x4x5 Bin	4x5x5 Bin
5	5x1x5 Bin	5x2x5 Bin	5x3x5 Bin	5x4x5 Bin	5x5x5 Bin

Higth 10	1	2	3	4	5
1	1x1x10 Bin	1x2x10 Bin	1x3x10 Bin	1x4x10 Bin	1x5x10 Bin
2	2x1x10 Bin	2x2x10 Bin	2x3x10 Bin	2x4x10 Bin	2x5x10 Bin
3	3x1x10 Bin	3x2x10 Bin	3x3x10 Bin	3x4x10 Bin	3x5x10 Bin
4	4x1x10 Bin	4x2x10 Bin	4x3x10 Bin	4x4x10 Bin	4x5x10 Bin
5	5x1x10 Bin	5x2x10 Bin	5x3x10 Bin	5x4x10 Bin	5x5x10 Bin

I used the GridfinityGenerator \| Fusion 360 \| Autodesk App Store that is made by Lev Mishin

The basis of Gridfinity a created by Zack Freedman
Gridfinity: Your Ultimate Modular Workshop is FREE!

I want to make the Gridfinity System more available for everybody, making it a one-button press experience.

Comment & Rating (10)

@H.Arens

Print Profile

0.2mm layer, 2 walls, 20% infill

@user_2253282611

Thank you for organizing all this! This shows 3x3 baseplate but the model is a 3x2 baseplate.

The designer has replied

@select2startPri

im sorry. I guess I made a mistake. Thanks for the info. I'll correct that right away and then reply here again.

@select2startPri

Hello, Mr. Important! I corrected the mistake I made there. Thanks again for the feedback.

@SeansZ

Print Profile

0.2mm layer, 2 walls, 20% infill

Bed Adhesion Issue

The designer has replied

@select2startPri

Sollte bei diesem Print eigentlich kein Problem sein. Wenn das Problem weiter besteht würde ich empfehlen auf Folgende Punkte zu achten. •Buildplate mit Alkohol reinigen - Möglichst nicht auf die Platte fassen. Die Fette der Haut bilden eine Trennschicht und verhindern Haftung. • Buildplate Leveling • Bei Warping (Ecken heben sich) Langsamer Drucken bzw. Filament überprüfen. (vielleicht zu hohe Luftfeuchtigkeit)