Ultimate Drawer System
Copyright Claim
Ultimate Drawer System
Boost
251
463
61
Print Profile(2)
Shelves - 0.28mm layer, 2 walls, 0% infill
Designer
35.3 h
8 plates
Drawers - 0.2mm layer, 2 walls, 15% infill
Designer
11.7 h
6 plates
Boost
251
463
61
8
715
734
Released
Description
🗃️🗄️📌🔩 Give a look to the entire Ultimate Drawer System collection to discover many drawer layouts and accessories!
Features :
- Shelves are made with grooves, avec drawers have a tongue, that let you to print a drawer of any height and place it anywhere into the shelf,
- Shelves are stackable horizontally and vertically for an easy scale up, you can attach them together with M4x8mm csk screws and M4 nuts, side to side or bottom to top
- Shelves are wall mountable, each one have 4x 5mm holes at the back
- Shelves are available from 2 to 15 drawers high
- Each drawers are available from 1U to 6U height. However, there is a limit in number of files per post, so you'll find 4U to 6U on this one
Comment & Rating (61)
All
Print Profile
Drawers - 0.2mm layer, 2 walls, 15% infill
Printing for my sons Lego collection. They are going well so far. Other then a filament tangle 🫣
The designer has replied
1
Reply
love the colours!
0
Reply
Print Profile
Drawers - 0.2mm layer, 2 walls, 15% infill
all good to go
0
Reply
Boosted
非常喜欢这种模块化设计
0
Reply
Print Profile
Shelves - 0.28mm layer, 2 walls, 0% infill
in my opinion this is a great setup good use of the storage and it can be colorful I really like it
0
Reply
A HotEnd Drawer for the XL would be awesome . ;-)
Might be able to squeeze 5 Hotends in there.
(Edited)The designer has replied
0
Reply
Do you mean this drawer in a xl version ? https://makerworld.com/en/models/72507#profileId-76685
0
Reply
Replying to @MarcelBichon
Yes! I was going to enlarge 150 and 150 but then realized it would make the compartments to big for the Hotends. could probably get 6 Hotends in an XL
0
Reply
Replying to @Jmorgan
I'll give a try
0
Reply
Print Profile
Shelves - 0.28mm layer, 2 walls, 0% infill
0
Reply
What's the rationale behind having no infill?
The designer has replied
0
Reply
Print speed
0
Reply
Boosted
Replying to @MarcelBichon
printing in britle cf material, seems I'd better infill >20%
0
Reply
Printed perfectly in PLA with good tolerances. I like all the drawer options. Thanks!
The designer has replied
1
Reply
Thanks for your feedback!
0
Reply
looks like a nice design! What is the width of the unit?
The designer has replied
0
Reply
Hi, drawers are 120mm x 120mm, 19mm height (without the tongue).
Overall shelves dimensions are 130mm (D) x 131mm (W) x nb U capacity (20 mm by U, plus 10mm for top and bottom, ex: 5U shelf = 5x20mm + 10mm = 110mm)
But the easiest way is to load the project in bambu studio and get the dimensions from here
1
Reply
Hi, nice work! Is there available drawers higher than 3U? as in picture? In STL files are only 1U-3U variants THX
The designer has replied
0
Reply
Hi, yes, makerworld has a limit of stl files per post, I see that only 1U to 3U were uploaded, however I just post 4U to 6U on another post, sorry for that! Here they are : https://makerworld.com/en/models/433070#profileId-337701
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (11)
Click to see more
Related Models
© 2024 MakerWorld