Caliper Holder for Multiboard and (HSW) - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

warlogh

Tools>Organizers

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 4 walls, 15% infill

Designer

57 min

2 plates

4.9(112)

Profile for A1 Mini

Designer

1.2 h

2 plates

4.8(15)

Snap included 0.2mm layer, 2 walls, 8% infill

29 min

1 plate

4.9(40)

Open in Bambu Studio

Boost

285

1115

208

1.9 k

1.3 k

Released

Description

10.08.2024 Update

Added additional Profile for A1 Mini Printer as original profile cannot be used from mobile app. So If You have A1 Mini printer and not using Bambu Studio, just use This profile

This is small quick model needed for myself. First intension was to print a ready model, but as it happens, best one I liked a little bit didn't met my taste. The models (which was already a remix) author made it with attached Multiboard snap as it found a Push fittings too loose. Somehow I see opposite. I'm a bit disappointed in Multiboards snaps as at least in my case are way too loose. Probably Tight ones are good, but haven't checked them yet. But push fittings are tight and strong. And as I have built my multiboard wall to be able to make things for Multiboard as well as for HSW I usually do, this time I made a 2 versions as well. Multiboard and HSW ones. Both are push in types and goes to both walls the same as shown in those 2 renders for HSW:

The blue is insert-empty.stl from original HSW model by rostap. Same as for Multiboard, just use a Multiboard Snap (I thing Multiboard Tight Snap would be better, but can't confirm it yet). You can use a Glue if you want (but absolutely not necessary) when putting Holder and Pin together. Supports not needed at all. Should be quick and easy print.

You can Buy me a coffee if You want to support me in my work here :)

https://www.buymeacoffee.com/warlogh

(And very Big Thank You For interest in my work)

honeycomb storage wall

holder

hanger

Comment & Rating (208)

@t.kautz

Print Profile

0.2mm layer, 4 walls, 15% infill

TOP! Fits perfectly! Printed in EXTRUDR PLA NX2 Metallic with a 04 nozzle

The profile uploader has replied

Show original

@warlogh

Thanks. Hemm, interesting HSW setup you have there I see. Is that from original from rostap or this is kind of adoptation? On photo tiles look different thickness and inserts in from other side. First time see this kind of a layout.

@t.kautz

Replying to @warlogh :

Hi warlogh, i found the Sidepanler here: https://makerworld.com/de/models/620594#profileId-544583 I´m using such a panel etc. for the first Time, so i put the connectors to the backside because it looks cleaner. Do they usualy belong to the frontside?? I like the clean optik the way i did it :)

@Deliveryhell

great caliper holder love that it fits perfectly on the wall

The designer has replied

@warlogh

Thanks.

@Miamiel

Print Profile

0.2mm layer, 4 walls, 15% infill

Thank you very much 😊

The profile uploader has replied

Show original

@warlogh

;)

@Randon0115

Nicely designed and works perfectly! I like that the push fitting is separate. It allows both pieces to print more easily than if they were one piece. The push fitting insert snaps right in to the holder. Thanks!

The designer has replied

@warlogh

Thanks. yes, separate push fitting here is for easier printing and to print this holder without need of any supports

@dhaddix1

Print Profile

0.2mm layer, 4 walls, 15% infill

like a glove!

The profile uploader has replied

@warlogh

thanks :)

@Dawtcalm

Print Profile

Profile for A1 Mini

fit my caliper perfectly

The profile uploader has replied

@warlogh

thumbs up

@LB_and_R

Print Profile

0.2mm layer, 4 walls, 15% infill

I printed a different version and the caliper's didn't fit exactly... This model fits PERFECTLY! Thank you!!!

The profile uploader has replied

@warlogh

Thanks. Happy You got one that fits :)

@zippy101

Boosted

Great print - fits my clippers perfectly. Used all default settings, the Multiboard snap used was the Moderate weight bearing one. Tolerances are perfect.Printed with BBL Basic PLA. Boosted.