Clip on Label for Hex-Spool

Remixed by

Clip on Label for Hex-Spool

Remixed by
Boost
32
69
15

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.16mm layer, 2 walls, 15% infill
0.16mm layer, 2 walls, 15% infill
Designer
11 min
1 plate
4.9(14)

Boost
32
69
15
0
112
56
Released

Description

If you already printed the Hex Spools and didnt see the Remix with Labels (https://makerworld.com/de/models/36802#profileId-35070) , this is a clip on Label for the Spools. Also you can now label both sides if you want ;-)

A small Arrow on the Backside indicates the orientation( has to point to the center of the spool).
I printed in PLA and it works great.

Comment & Rating (15)

Please fill in your opinion
(0/5000)

Print Profile
0.16mm layer, 2 walls, 15% infill
Came out perfectly. Thank you :)
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
The model and print itself is fine, but it should be noted that this will only work with v2.2 of the Bambu Reusable Hex Spool by Brandido02. This will not work with v3.2 as the hex pattern is much larger.
0
Reply
Could you make an adaptation for a different coil please? :) https://makerworld.com/ru/models/97411#profileId-113212
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Thank you
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
really nice model and print 👍
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply