A1 Mini top spool holder 45
Copyright Claim
A1 Mini top spool holder 45
Boost
109
184
30
Print Profile(3)
0.28mm layer, 2 walls, 15% infill
Designer
2.6 h
1 plate
0.16mm layer, 3 walls, 15% infill
4.1 h
1 plate
0.16mm layer, 3 walls, 20% infill
14 min
1 plate
Open in Bambu Studio
Boost
109
184
30
19
212
121
Released
Description
i really like the idea of the filament going straight to the print head and not using the bowden tube going up and over. i also made a little holder for the print head wire to go though and hold it out of the way. if you have any thoughts to make it better feel free.
Comment & Rating (30)
All
Boosted
Printed well with no issues. Fit well. looks good and holds the spool. I did go to 4 walls and 15% crosshatch infill for extra strength. I like that it eliminates the ptfe tube and puts the cable behind the printer. Much easier access to the spool for changes.
1
Reply
Print Profile
0.28mm layer, 2 walls, 15% infill
very nice and fit
0
Reply
Print Profile
0.28mm layer, 2 walls, 15% infill
very nice and handy
0
Reply
Print Profile
0.28mm layer, 2 walls, 15% infill
Нарешті вирішена проблема з заплутуванням прутка, та заломом.
0
Reply
Boosted
Great print, no problems here either. I printed the original profile in Elegoo PLA+. Forgot to route the cable through the holder the first time, so had to remove it all and start over. Now to remove the original spool holder...
0
Reply
Boosted
Print Profile
0.28mm layer, 2 walls, 15% infill
0
Reply
can I use this for a second filament holder for doing manual coloe changes with no ams?
The designer has replied
1
Reply
yes you can. that’s a good idea also. 👍
0
Reply
my a1 mini is in shipping, and i think ill need this to save some space... one question, can i print this spool holder with a1 mini? is it fit to print with its bed size? thanks
The designer has replied
0
Reply
yes. I printed it on my mini. 👍
0
Reply
Just got my A1 Mini and I'm super excited to print this, do I need to purchase screws to attach? Thank you!
0
Reply
Boosted
You re-use the screws from the top of the tower, and there's another cover under the top that will need to come off as well. Be sure you re-route the black cable through the bracket on the right before you attach the spool holder to the top of the tower.
1
Reply
Print Profile
0.28mm layer, 2 walls, 15% infill
Excellent solution for my issue!!!
0
Reply
© 2024 MakerWorld