V2 - Stackable Impossible Passthrough by RJ Design

RJ Design

Toys & Games>Other Toys & Games

GIF

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 30% infill

Designer

2.3 h

1 plate

4.9(15)

1 Color 0.2mm layer, 2 walls, 30% infill

2 h

1 plate

5.0(1)

2 Color, 0.2mm layer, 2 walls, 5% infill

2.3 h

1 plate

Translucent/Single Wall: 0.2mm layer, 0% infill, .6mm Wall

3.6 h

2 plates

Open in Bambu Studio

Boost

250

392

461

326

Released

Description

The Design

You Asked for it, its here!

The new Stackable impossible passthrough!

Fully compatible with the V2 Series,

The “male” part of the thread seems to defy physics by passing through the slightly larger “female” Part

Now your can print as many tall parts as you like and add them together to make an extra long vortex tube!

The Ball Twists its way down the Tube

There is a Top cap and a Bottom cap to prevent the the ball escaping

Or, if you've got a spring from a ball point pen lying around, try adding this into the centre!

Dimensions of 1 tall part is approximately: diameter 32mm x 60mm

Let me know if you experience any issues.

If you enjoy this print consider giving it a boost (It'd really help me out!)

Printing

Ensure Auto Tree supports with 30 degree angle is used (to support the top section of the tall piece)

The ball is “floating” to ensure the best lower surface possible. use auto tree supports to an angle of 30 degrees

It is set up to print sequentially, it is very tight on the print bed, if you have any issues i suggest you split into separate plates.

Once printed let the build plate cool before trying to remove.

My Work

After many years in Engineering, I've just decided to try and follow my childhood dream of becoming of a Creative Designer.

A Creative Designer of what? No idea! Right now I really like puzzles, mechanisms and kinetic sculptures so that's where I'm going to focus my efforts.

Boosts really help me out

To support me even more (not ever required), for information around development of my models (background to come) and for commercial use, i've started a patreon here:

https://www.patreon.com/RJ_Design

Comment & Rating (43)

@WeBe3Dprinting

Print Profile

1 Color 0.2mm layer, 2 walls, 30% infill

Prints awesome in PolyTerra matte rainbow. You gotta force it back and forth a couple times before it'll start easily sliding through the part where two towers join. Once it's broken in, it's amazing.

The designer has replied

@CrownWalker

Wow that is a beautiful color, Good choice!

@RetroGHF

Boosted

These are so much fun!

The designer has replied

@RJDesign

What a collection! Thank you! I'll try to keep new and interresting ideas coming!

@tubstr

Print Profile

0.2mm layer, 2 walls, 30% infill

Turned out great. Thanks for sharing!

The designer has replied

@RJDesign

Looks Fantastic!

@CheeseMcGee

Print Profile

0.2mm layer, 2 walls, 30% infill

As per usual, this model printed great and looks awesome. Thanks for all the hard work!

(Edited)

The designer has replied

@RJDesign

Thank you for the kind words!

@Spookee

Print Profile

0.2mm layer, 2 walls, 30% infill

This stackable version is great and printed perfectly with the profile. I may soon run out working pens in the house if I keep raiding them for springs to make more.

The designer has replied

@RJDesign

You can make it longer too if you print more outers.... Have fun

@TKAvers

The wife and I love your prints. however I always have issues, it could be down the filament I am using. the issues are the flow of the models, they always require some assistance or get stuck, also parts easily break. I'm using matte pla. do you suggest something else? I printed this today and it will only go so far up and I've already got a small break. Suggestions ?

The designer has replied

@RJDesign

Hey, thanks and I'm sorry they sometimes don't work for you. In terms of fit, the most important thing is that the filament is calibrated so as not to under or over extrudes. From the looks of your print it looks like the filament might be slightly damp, any chance you could dry it or do you have some other filament you could try? Damp filament makes it less stuff so it flexs more when printing giving it that lump look

@MofWI

Print Profile

0.2mm layer, 2 walls, 30% infill

So much fun!

@KiaVhar

Print Profile

0.2mm layer, 2 walls, 30% infill

Print very well and make a perfect fidget

@nate3D_

Boosted

This is the one. This is it. The fidget I always wanted but could never describe to anyone. It falls. It shoots. It comes apart. It goes back together (most of the time). 10/10 VERY well done!

The designer has replied

@RJDesign

Amazing thank you so much!

@user_2298874545

This is next to be printed and then the office will go wtf!! how you gonna huh !!! and i will win bets with it hehehe, printing it about 1.5 hrs from now

The designer has replied

@RJDesign

i look forward to the results

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.