4-way PTFE splitter - no hardware necessary - Free 3D Print Model

Search models, users, collections, and posts

SirPrintAlot

3D Printer>3D Printer Accessories

IP Report

Print Profile(2)

All

H2D

A1 mini

X1 Carbon

X1E

P1S

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.20mm layer, 2 walls, 15% infill

Designer

2.1 h

1 plate

4.8(138)

0.6mm nozzle, 0.15mm layer, 3 walls, 10% infill

14 min

1 plate

Open in Bambu Studio

Boost

395

1120

171

1.6 k

1 k

Released

Description

This is a 4 way version of my y-splitter / y-connector (https://makerworld.com/en/models/393265)

This is again a 100% 3D printable connector/splitter solution for the Bambulab printers P1P, P1S or X1.

The only thing you will need is 30mm PTFE tube between the PTFE tube connector of your printer and the Y-connector/splitter, see the image (blue PTFE tube).

The mounting plate is optional the Y-connector/splitter works just fine without it.

There are 3 different mounting plates to choose from, one with no hardware, one with that use two 6mm M3 screws and one that uses two 8x3mm magnets.

Hope you find the model usefull.

You can also see my other printable add-ons for the Bambulab printers:

https://makerworld.com/en/models/213926#profileId-233439 (AMS button adapter with PTFE tube)

https://makerworld.com/en/models/402613#profileId-304285 (Dual purpose bed scraper)

https://makerworld.com/en/models/393265#profileId-294453 (Y-splitter connector for PTFE tube)

https://makerworld.com/en/models/394761#profileId-295931 (If you need to connect two bowden/PTFE tubes)

https://makerworld.com/en/models/375898#profileId-275865 (Drybox IKEA samla 22l)

https://makerworld.com/en/models/404520#profileId-306293 (Purge strip bin for Bambu P1S)

Comment & Rating (171)

@miki3d

Boosted

Pinned by Designer

Print Profile

0.20mm layer, 2 walls, 15% infill

The interior PTFE holders in the nuts can easily break when screwing it on. Also the print profile would be better to randomize the seams to avoid seam lines inside the tunnels which is causing the breakage and friction.

The profile uploader has replied

@SirPrintALot_

Thanks for the feedback, I have updated with my newest version of the cap/nut that is stronger. I do not like the random seam look but have placed the seam on the back now.

(Edited)

@grostim

Print Profile

0.20mm layer, 2 walls, 15% infill

printed in PETG. looks good.

@Flarbow

where did u get that 90 degree support??

@grostim

Replying to @Flarbow :

https://makerworld.com/en/models/1245913-side-spool-holder-for-p1s-and-x1c#profileId-1267368

Show original

@Zimmi

Print Profile

0.20mm layer, 2 walls, 15% infill

Printed well, installs perfectly amd i used it for a while however, I finally opted for a different design with PTFE inserts. due to its design, you have to be careful installing the tubes as the little press latches might break on you if your are not.

@jbarber82

hello, can you link the one you are using with pTFE inserts for me? thanks!

@Zimmi

Replying to @jbarber82 :

https://makerworld.com/models/18174

@FloFischer

Print Profile

0.20mm layer, 2 walls, 15% infill

Sehr gut gedruckt auf meinem P1S, die Gewinde laufen sehr schön... Auch die Funktion ist gut... Allerdings schaffe ich es nicht, damit mein TPU 95 A in den Extruder zu laden... Dafür hatte ich es eigentlich gedruckt, da ja TPU nicht in den AMS passt

The profile uploader has replied

@SirPrintALot_

Strange, have you pressed the PTFE tubes all the way in? I did the design to be able to feed TPU and other filaments that are not AMS compatible.

@bionicmachinari

Print Profile

0.20mm layer, 2 walls, 15% infill

looks good! thanks!

@user_4271506256

Print Profile

0.20mm layer, 2 walls, 15% infill

Does the job, but PTFE tubes may come loose. Easily enough fixed as it only happens when loading or unloading.

(Edited)

@user_668157319

Boosted

Print Profile

0.20mm layer, 2 walls, 15% infill

works perfectly highly recommended

Show original

@Naclox

Print Profile

0.20mm layer, 2 walls, 15% infill

Great print that works perfectly for being able to use the AMS and external spools when needed.

@MAT_3D

Print Profile

0.20mm layer, 2 walls, 15% infill

You are my saviour! I boughr H2S and forgot to buy the splitter and have no ptfe couplers, works flawlesly, Only thing that is a bit tricky is tightening the nuts as they are very close together

@D.R_design

Print Profile

0.20mm layer, 2 walls, 15% infill

perfetto!

@xeronn

Boosted

Print Profile

0.20mm layer, 2 walls, 15% infill

It work really nice, with a pretty details.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.