Heltec T096 case for 3000mAh LiPo and solar panel

Couldn't find a case for the Heltec T096 with a 3000mAh LiPo and a solar panel, so I designed one based on several other case ideas.

BOM:

• Heltec T096 - https://www.amazon.com/dp/B0GXYWXXQC
• 4 M3x30 bolts are needed - https://www.amazon.com/dp/B0G498V97K
• 915MHz Antenna - https://www.amazon.com/dp/B0CTXL61LY
• 3000mAh 1S LiPo - https://www.amazon.com/dp/B0FR8XSXX6

The holes through the layers are wide, so the M3 bolts pass through, except the top panel, allowing the bolts to be tightened. Assemble from the bottom (solar panel) up. Make sure the cables pass through each layer correctly before connecting to the T096. Connect all cables to the T096, then align the USB port to the corresponding hole first and push down the rest of the module in the case.

Step and F3D files included.