Ascending Cylinders test
Print Profile(1)
Description
Purpose
This parametric jig is designed to identify the exact 3D-printed hole diameter required for a specific mechanical clearance. Unlike a "blind" hole test, these cylinders go entirely through the block, allowing you to verify that your target object (such as a Winston-Lutz BB or alignment peg) passes through with the desired amount of friction or freedom.
How to Use
- Set Your Range: Use the MakerWorld Customizer to set your cylinder_start_diameter and the step_size (e.g., $0.1\text{mm}$ increments).
- Verify Through-Fit: Once printed, slide your target object through the holes until you find the one that meets your clinical or mechanical requirements.
- Read the Label: Each hole is accompanied by a vertically debossed label on the side of the block for easy identification.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)