Wall Mounted Cover Box

I needed something to cover up an electrical outlet in our kitchen - so I thought of this. Something that makes it so you can still use the outlet, but keep it boxed in when there is no need to plug/unplug. You can of course use it for other things as well, maybe to keep kids, pets from bumping in/turning on things.

Make sure to scale it to your proportions. The printed model in the pictures is scaled down.

I printed in PETG and set first layer height a bit higher so it would come loose easier.

I changed strength to gyroid and changed infill for the test model - you might need to adjust this if you print with PLA.

The uploaded model has some clearance, allowing you to put on an o-ring or silicone for outdoor use - change the scale of the wall mounted piece if you want a tight fit.

This model does not have screw holes, it is intended to be used with 3M tape.

Please be aware this is my first model created from scratch - there is room for improvement