Hueforge Pokémon Card Venusaur
Print Profile(1)
Description
Boost Me (for free)
Hello dear 3D print friends
Here I provide you with my created Hueforge of Bisaflor the Kanto starter Pokemon
Please note that Hueforge models should only be changed in length and width if necessary
Changing the height can affect colors and contrasts
This error message in the slicer regarding floating regions is normal for Hueforge models and can be ignored
Hueforge models are usually printed without supports
Project: Bisaflor Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 122.23x170.1mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA Bambulab Black Transmission Distance: 0,6
PLA Bambulab Bambu Green Transmission Distance: 2,0
PLA Bambulab Yellow Transmission Distance: 6,0
PLA Bambulab Jade-White Transmission Distance: 5,0
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Bambu Green
At layer #18 (1.52mm) swap to Yellow
At layer #22 (1.76mm) swap to Jade-White for the rest.
Please also feel free to look at my other models
I would be very happy about positive feedback a like or a boost :-)
Thank you and good luck with printing
Regards AK Print Factory
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)