Charizard Multicolor by entroisdimensions_figurine

entroisdimensions_figurine

Miniatures>Creatures

IP Report

Print Profile(10)

All

X1 Carbon

P1S

P1P

X1E

H2D

A1 mini

0.2mm layer, 3 walls, 10% infill

Designer

94.9 h

3 plates

4.7(110)

Single colour, 30%, 0.16mm layer, 3 walls, 10% infill

1.2 h

1 plate

4.8(78)

OneAMS-A1 Mini

26.8 h

1 plate

4.4(36)

OneColour, A1 Mini

4.3 h

1 plate

4.5(28)

Click to see more

Open in Bambu Studio

Boost

1393

2528

327

276

7.1 k

2.3 k

Released

Description

Charizard is now available, and you have the choice between different file formats:

STL
3mf for Multicolor Bambu Lab printer
3mf for Multicolor Prusa printer

In all file formats, you have the choice between two versions of Charizard:

with the wings on its back
without the wings, which can be printed separately

Video of printing the model: Instagram, TikTok, YouTube

For printing, I used PolyTerra PLA filament from Polymaker:

6 colors version:

PolyTerra PLA Sunrise Orange(for the body)
PolyTerra PLA Savannah Yellow (for belly and flame)
PolyTerra PLA Muted Blue (for the eyes and wings)
PolyTerra PLA Lava Red (for the flame)
PolyTerra PLA Cotton White (for the claw, white of the eyes )
PolyTerra PLA Charcoal Black (for pupil)

To discover which new models will be released next, follow @polymaker_figurines:
Instagram, TikTok, YouTube

Join the Figurines Community on Discord

Happy Printing!

-----------------------------------------------

Printer settings on the Bambu Lab X1C

Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: 10%
Filament brand: Polymaker
Filament color: Red, Yellow, Black, White, Blue
Filament material: PolyTerra PLA

Comment & Rating (327)

@Quiztastic

Print Profile

OneAMS-A1 Mini

This is maybe the cleanest multicolor print I’ve done so far. man he took about 24 hours to print but I decided to go with Shiny colors. printed on A1 Mini with AMS lite. Bambu basic PLA matte Black, Bambu Basic PLA matte red, elegoo matte yellow and Elegoo matte White. Really great design! Great Job!

@Reds3D

You should totally post your print profile on this with the shiny color set, I totally want to print a shiny one now!!!

@D1visionbyZer0

Replying to @Reds3D :

I agree

@Foxart

I wanted to print this with a single AMS, which is possible when you change the eyes to red and yelow instead of blue and black. and just change out the colors before reaching this point. But if I do there remain some black and blue part inside the model. could you fix this?

@PRINT3DGIFTS

adjust flushing settings but it's inside the model it doesn't really show or does it ?

@Foxart

Replying to @PRINT3DGIFTS :

it doesn't show but makes it more than 4 colors and so unable with a single ams

@Jaglassbrenner

Replying to @Foxart :

When you go to print it simply select yellow for blue and red for black and just remember to switch it out.

@AndyHope04

Print Profile

0.2mm layer, 3 walls, 10% infill

@Techworld_JB

can you detail what colors you used for the shiny version?

@AndyHope04

Replying to @Techworld_JB :

Sure. PolyTerra Ash Grey, Lava Red, Cotton White, Charcoal Black and I think it was Army Beige

@AndyHope04

Replying to @Techworld_JB :

Sorry I think it was polylite cream

@And1re

Boosted

Print Profile

OneColour, A1 Mini

Printed in two colors. It turned out great, although the lower part of both wings is a bit crushed

Show original

@user_1003726678

The result is incredible Excellent work

Show original

@carlos.g.fonsec

Print Profile

0.2mm layer, 3 walls, 10% infill

If you are printing the wings by themselves, print them facing the Y direction and use a raft or they will fall. Add eight lines of support for the Charizard tower. If the tower falls, you will be doomed. I printed it at eight inches tall.

@Aditya_06

I have printed mine on A1 Mini everything is fine but the stomach and the area below it looks very rough and not very nice, can someone please help me out, help me update the quality settings so that even I can get awesome and smooth prints.

@SVCprints

try using the 0.16 high quality profile and make your fan speeds in the filament profile always 100%. the ugliness you are seeing is lack of cooling on overhangs. so you need to slow down overhangs and get maximum cooling during overhangs.

@DPGame08

Print Profile

Single colour, 30%, 0.16mm layer, 3 walls, 10% infill

cool charizard!

@Nastiibudz

My first ever 3d print and paint. I really liked the way it turned out. The supports that I used failed for the wings so I had to heat up the plastic and smooth it down.

@ludiippo

Love it !

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.