Flag Clamshell Wall Holder Mount Clamp
Print Profile(1)
Description
Clamshell Wall Flag / Clamp.
I bought flags for my garage but they didnt have any premade holes or mounts, and i didnt want to put a screw through it as it could cause the flag to rip.
This design is simple but very effective. Put the Serrated portion of the clamshell over the corner of the flag, use the middle hole for a bolt and nut, then tighten it. This clamps the flag to the mount. Then, with the remaining screw, pull the flag tight and screw it to the wall! I used a m4 screw and nut for the clamp, but m4/m3 screws and nuts with washers will also work.
YSES LESS THAN 10 GRAMS OF FILAMENT!!!!! :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)