Stackable Sardine Tin Can Storage Box Set

Sardine tin can inspired stackable set of boxes. Sliding lid with a latch securely closes. When open, lid snugly fits under the container. See the gif among model photos for a hint how they can be open the most elegant way. Dual color profiles are poop friendly - filament changes are minimized.

Containers in the same print profile are stackable. Dimension information is in the print profile title. The dimensions are approximate. I designed the model parametrically and dimensions listed are parameters used that tell the bottom outer dimension and dimension from print bed to the lid bottom surface. If you would like to see a specific dimension, let me know. Unfortunately model is too complex to be successfully uploaded for modifications directly on Maker World.

Print profiles organized as follows:

• Main print profile with single most representative tin can, single color. To not scare away with print time.
• Print profile with 2 different can sizes that are fully stackable. Small cans stack on the bigger can.
• Deluxe print profile containing 6 different can dimensions (3 different heights of 2 different width and length cans) that are fully stackable.
• Additional profiles that all have one width and length can dimension + multiple different heights per profile.
  • I added 66 and 88 mm high cans to the 60 by 100 mm cans profile based on user feedback.
  • I added 44 and 66 mm high cans to the 100 by 100 mm cans profile based on the user feedback.
     

Dual and single color profiles available. As mentioned, dimensions listed in the profile name.

The most complex name: Set 65x65/138x22/33/42 mm Dual Color means the following can dimensions are included:

• 65 mm width x 65 mm length x 22 mm height
• 65 mm x 65 mm x 33 mm
• 65 mm x 65 mm x 42 mm
• 65 mm x 138 mm x 22mm
• 65 mm x 138 mm x 33 mm
• 65 mm x 138 mm x 42mm

And while you are here: If you are into cans, maybe you'll like this silly thing: