Bleach Hueforge
Print Profile(1)
Description
Print with 100% infill with a layer height of 0.08mm and a 0.16mm base layer
The model measures 113.68 x 160 mm
You can print with higher layer heights, below the 0.48mm base thickness
The maximum allowed thickness is 2.24mm and the actual thickness is 2.24mm
Filaments used:
- #000000 PLA eSUN Black. Transmission distance: 0.3
- #706e86 PLA Winkle Ash Gray. Transmission distance: 0.2
- #ffffff PLA eSUN White. Transmission distance: 1.3
This print uses 3 unique filaments
Change instructions:
- Start with the Black filament
- At layer 11 (0.96mm), switch to Ash Gray
- At layer 24 (2mm), switch to White for the remainder
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)