SparkleSink V2 - Bathroom and Kitchen Drainer Tray

SparkleSink V2 - Bathroom and Kitchen Drainer Tray

I present a reinvention of an idea with great new improvements.

all explained below:

Features:

• Differences from the first version.- Its format is the same and the dimensions are similar, however, its functionality and quality are marked by the experience and feedback from the MakerWorld community.
• Drop Angle.- Allows for more efficient water drainage.
• Drip Edge.- Thanks to the drop angle, the efficiency of the drip edge increases, preventing wetting or water sliding along the bottom surface.
• Height.- With its greater height, it can clear the edges of sinks.
• Resistance.- Its shape and design are intended to resist drops, weight, and the passage of time.
• Format.- Its dimensions are designed to be printed on all printers on the market.
• Design.- With its discreet and elegant shape, it subtly hides all its qualities.
• Efficient Printing.- in all my designs and models, I try and seek the best printing method to avoid printing problems or excessive filament use.

Printing Features:

• Recommended Filament: PLA or PETG.
• Bed Adhesion: No.
• 3 walls 15% infill.
• Supports: Yes (Normal).
• Model size 180mmx170mmx50mm.

FIRST VERSION OF THE MODEL

Note: The model is efficient and functional in its main purpose. This new version improves and resolves some issues that the first model may have had or were not resolved at the time.