Print Profile(1)
Description
The model should be placed on the table sideways.
ATTENTION!!! The supports must be drawn manually exactly as shown in my screenshot, otherwise something may go wrong. I’ve also attached a 3MF file.
I used PETG filament.
Layer height — 0.2 mm.
3 perimeters (walls).
Infill — 15% or higher.
After printing, carefully remove all supports, then gently start rotating the mechanism (NO OVERDOING IT) — the internal sacrificial supports will begin to break and the mechanism will start to work.
ATTENTION!!! The travel/motion of the central rod is specific; please make sure you understand how it operates so you don't break it.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (14)